codes

Morning All :-) So I was driving home from my friends house at about 10PM last night when the Engine light came on my fairly new to me 2008 CLK 280. Being a 280 I have checked the engine number of the M272 engine and it looks to be quite past the balance shaft issue. I see P0128 refers to the...

Hi, Found this list of "U" prefix trouble codes for the electrical side of MB Obviously mod's feel free to delete or move this post. U0001 Hi Speed CAN Comm Bus U0002 Hi Speed CAN Comm Bus Perf U0003 Hi Speed CAN Comm Bus + Open U0004 Hi Speed CAN Comm Bus + Low U0005 Hi Speed CAN Comm...

had the engine management light come on two weeks back for the first time and went down to my local mechanic to get the codes read. i already knew about the glow plugs but the boost pressure regulator was a new code. he cleared the codes for me and the car has been driving fine for two...

Hi Everyone, I am having trouble with drivers window not opening, and diagnostic tool reads codes 903A, 9021, 902D, all 90-- codes. Can someone please help in where I might be able to get more information on these, as l have googled and search forums but still cannot find any starting in...

Hi all My dad has just bought an ml270 cdi. Can anyone give me the original spec/option list from the chassis Number? Chassis number is 1631132A536657 Thanks in advance

fault code on reader B275113 The Squib for the side bag "front passenger" has a malfunction.there is an open circuit Fault code B005213 The belt buckle front passenger has malfunction There is an open circuit Just a bit of background i changed the seats in my w204 ( 2008 c220 cdi) the new...

Got my e280 cdi plugged in today and it's throwing these codes... P0130 P0135 P0030 I'm guessing that it's not a o2 sensor issue but more of a inlet port motor issue can any confirm or have had these codes corrected and what the issue was? Tia

IAT sensor I've got a few different fault codes coming up atm it started with random misfires and was also about 4 different cylinders were missing so I changed the Mass Air Flow Sensor and all seemed to be good but has just started playing up again and I'm getting the same codes plus P0110...

Hi. I have a Mercedes 320 GL 320 CDI and it keeps going into limp mode. I have some error codes, but not sure what they mean. Please can anyone help? Thank you. Codes: 2230-1 Transmission control ETC FAULT 13 2297-1 Transmission control ETC short circuit to positive 2511-1 Check component Y27/9...

Last night my e220 went in to limp mode,i just got the codes up 2017-1 2348-1 All help would be really appreciated as i need the car for work Thanks Guys Ray:thumb:

When i purchased my car the phone in the center console does not seem to switch on and charge, the car is STILL giving the message "Tel Error - Tel not plugged in", . So just ran a diagnostic via STAR on it and these are the 2 codes its come up with. N1201 - The microphone line from...

Hi all. I'm posting as i'm stuck, and hope someone could help. I use forums for Aprilia, Yamaha, Triumph and house renovating, but never needed to browse the MB forums as the pair of cars have always been bobby dazzler! Until now! I bought an iCarsoft i980 to diagnose an ESP/ABS/Tyre...

hi all my car is throwing these codes up if i clear them the engine management light comes off the dash but solid spring light stays and these codes do not clear are they all related anyone else have this issue cheers

I get the feeling this one is a spurious code as i have seen it come and go in the past. I also used to get spurious codes on my A45 as some of the requested sensor data wasn't supported by the car. I probably scan my car every week or so and since Christmas, when I bought the car I've seen...

Hi, Firstly I hope this thread is in the right section! Some of you may have seen a thread I made recently (http://www.mbclub.co.uk/forums/electronics/207585-cheap-diagnostic-scan-tools.html#post2278984) about diagnostic scanners, which one to get, as unfortunately my CEL came on...

dear members can any one help i am after error codes manual for sl500 r129 on 1990 i am trying to find what these error codes are for socket 7 come up at (3) socket 8 come up at (17) socket 10 come up at (20) (27) (29) socket 11 come up at (14) can any one help please thank you for your time...

Hello all - apologies if this has been answered before, I cannot find anything specific. MY 2006 W221's heater has just started to exhibit an intermittent fault; when it goes wrong, the fans run at a medium-high setting, whether the system is on or off - when on, the air is hot (very hot)...

My question is do fault codes and messages have a date stamp in the ECU. If the error codes and messages are cleared from the system and ECU would Mercedes still be able to tell when the fault actually occurred ?

After a routine service car engine management light came on with these codes. I believe P1102 means Mass Air Flow sensor in range but lower than expected, but still greek to me! Car drives fine, no limp mode, any ideas/ help would be welcome. Man thanks

The SRS light on my 98 E240 has been on since I bought it. The MOT is approaching so I took to a dealer a couple of weeks ago to get the codes read, the following SRS codes were found: 3-032 - AB Control Unit : Terminal 15R has undervoltage or overvoltage 1-000 - Control Unit AB is defective...