d2b

Part number please of a D2b loom that is longer than 1 metre but not as long as the run from the Radio to the CD changer. I bought one on e-bay but is too short amd my phone unit is living in beside the spare wheel so I need to move it to the opposite side from the DC changer rgds

Ok Guys I have a question In the comand diagnostics screen from holding down mute and buttons 1&2, I select Diagnostic and D2B Components mine reads: POS Actual Config 000 180 1C8 001 190 0F0 OFF 000 190 OFF 000 000 OFF 000 000 Another clk meber on the forum (thanks Alex) reads...

I have a W220 and W203 conversion to make into UHI. Can you share with me the pin location of the wires from 10pin RJ header to 10pin AMP connector. I purchased over the weekend the part numbers for the connectors used in the UHI harness joiner inside the armrest. 001 545 59 40 housing...

I want to install a bose amp to my comand in my ML. I have got the amp, cables and other bits including the D2B. But I also have the Cd Changer which is D2B - How do you get the lot to work together?

I am adding a BOSE system to a CLK and I am getting conflicting advice on the D2B setup. It can be either one of two things. COMAND > Phone > BOSE > CD [global] COMAND > BOSE > PHONE > CD [USA]

I noticed the other day that my car doesnt have a "D2B wakeup". Is it only for the phone ? Is it a ring that follows the optical loop or is it a single connection? Would anyone like to explain to me where it starts and ends ?

I know that CD Headunit phone etc are connected on using the optical loop but what other systems use this form of control. thanks