My wife has borrowed this car from her boss.
I try to find out what kind of systems it has and how it works.
What is standard for this modell?
Is Distronic standard? I have not three switches with the gear shift, so I guess not.
The cruise control don't seem to work.
Neither the bluetooth...
I'm no expert mechanically so seeking some further opinions.
My M102 E200 has some cream in the coolant, you can just about see it on the top of the bottle itself. It has also consumed some oil, I should of checked how much as I topped it up today but it was certainly a noticeable amount on...
Hello there everybody. Since I live in a small village in Scotland (Highlands) I am quite limited with my choices. I need to replace the heater valve on my mercedes e 200 kompressor 2006 facelift model. I've bought the valve, even a complete socket set but I didn't manage to do it myself. First...
hello to everybody. I am a new owner of a Mercedes e200 kompressor 2006, facelift model. i`ve just bought the car 2 weeks ago and this is my first Mercedes I must say. First of all, I am interested where can I have a proper diagnose? (STAR if possible). I live near Oban (Highlands) but I am...
Hello all. I am hunting down the cause of a P0172 code and need to check the vacuum lines under the air box. I was wondering if anyone has the part numbers and maybe diagrams or pictures for the vacuum lines for this motor (1.8) My car is a 2003 Mercedes-Benz E200 W211 Kompressor
Thanks
Hi all...I have an issue with my e200 kompressor (2006 184bhp) car is even less responsive and starts shaking once I go over 5k rpm or give it kickdown there is a noticeable lack of power.when I turn off the engine and start up again it runs fine aslong as I don't go past 5k RPM also as a result...
So I made a led flash code reader for the grandfather's e200. And here is what it brought up.
Pin6- 2,3,8 'SRS'
Pin10-8,13, roadsters soft top( not correct dosent add up)
Pin12- staying on constant?? ( infrared remote) is faulty
Only thing is the document that I'm reading off says that pin...
Hello, what is the correct ohm readings on the 4pin cts. I read 1.8kohm and 4.5kohm on the pin diagonially . Car was just above cold, prob some were between 30-50 degrees.
Also what diagnostic device is used to read these cars.
Look forward to a reply
Thanks
Hello all,
My grandfathers car is suffering from an idle control problem. I came about when the fuel pump went and for some reason the mechanic decided to clean the TB. from this the idle problems started.
This car does have a sensor attached to the throttle body on the far side. It's also has...
Hello!
I got really big problem with Red battery message ( Visit workshop)
I scan Battery Control Module with my diagnostic tool i get fault code "9055 - The terminal 61 signal on the CAN bus is missing or is faulty."
but that fault code say nothing for my problem.
Problem 1
I also check...
hi all
i had been getting a P0420 code once a month and now today I got 2 in a row. The car runs fine with this code but i would rather fix it.
This is the log i pulled from my OBD reader and was wondering where do i start in diagnosing the problem.
meta-info header:Error Codes
file...
Hello, has an E200 CDI 2003.
*
The multifunction steering wheel function is normal except that it looks like it has any form of communication to CD / Radio and Navigation.
*
I can see the instrument panel that it does not look that navigation and radio is turned on.
*
So the steering wheel...