Hi guys,
Was hoping someone may be able to help, have recently noticed I'm getting condensation/water droplets in the nearside headlight on my W209 CLK and was wondering if there is much I can do?
I know that as it's vented it's supposedly acceptable to have some condensation, but it seems to...
Hi All
The standard headlights on our ML are far too yellow for me and i'm thinking of changing them for a brighter white colour.
Has anyone done this on their ML? Is there a how to guide on this?
Anyone know which xenon bulbs i'd need to buy?
Many thanks
Suraj
Hello there
I have read several threads regarding condensation in headlights like these, however Incant help but feel like this is an exception to the norm....
Below are pictures of both my headlights taken at the same time, one looking completely fine (drivers side) and the other looking...
Looking to buy for 1992 pre facelift model Bosch brand headlight or glas only. Have to be excellent condition only. Can buy or can swap for genuine wing in good condition.
Hi there peeps I hope your all having a lovely evening. I apologize if I'm posting in the wrong area. I've just join the forum and I've purchased my first ever MB 350 w205 2016 model.
I will be receiving the vehicle on Thursday.
I just have a quick question. My vehicle is fitted with LED...
I have a 2007 E280cdi with ILS. A few weeks ago the right hand xenon went out and an ILS inoperative error accompanied this. I turned the lights off and on again and the light came on again. It then worked for a while and went off again.
My i980 tells me that the error is e2m3 right...
Driving to work in rain today and after about an hour I got two warnings come up. Intelligent light system inoperative and at same time a lamp symbol with Right Hand Dipped underneath. Thought that right front light had failed. Pulled close to car in front whilst waiting at lights and all my...
Following an incident this afternoon with my 1999 facelifted S210, I may be in need of some bodywork:
1) a NSF wing.
Are facelifted wings the same as pre-facelift?
Are saloon wings the same as estate?
2) Are front bumpers common across the range, or different on the facelifted models?
3)...
On the ML 2007, and probably several other models, there is a springy stainless steel adapter to hold the H7 Halogen Headlight bulb.
Their purpose is to hold the bulb and allow a bayonet-type fitting into the Headlight housing, because there's no room for those endearing springy wires that...
Hi guys,
I wonder if someone could offer some advice/ has had any experience with a similar problem.
My xenon dipped beams have been presenting problems for me lately and it's really driving me mad now :)
Ok so basically, when I switch on the car sometimes both headlights/ one headlight...
Wondered if you can configure the realignment of headlights for driving on the continent. My previous car (Audi) let you change through the MMI system assume Mercedes have something similar through their Command system?
I have a 2016 A250. I find that with the lighting switch in the AUTO position and driving at night there is a 2seconds delay between switching from dip to Main beam. This is not the case on my partners A200.
I have reported this to my Merc dealer as a safety issue and their response is that...
Just bought 2006 ML350 about a month ago. Really unhappy with the dipped beams, and I've also had a dipped beam warning from day one, although the light is working.
The dips are halogen, but when I remove the bulb holder I found that the yellow wire had been removed completely and was just a...
Hi Guys,
I have a CL 500 (W216) with xenons, but the inner pair of lights for high beam are halogen. I wanted them to match the xenons so I bought some Philips diamond vision 5000k bulbs and they match the colour of the xenons almost exactly to my amazement. I've tried halogen bulbs before...
Helloooo,
My HID dipped comes on then I get a warning after about 5 minutes that the left one in inop. Got the bulb changed at Halfords (£67!!) but, again, after 5 minutes of them being on I get tge same warning. Circuit diagrams in Haynes are a bit limited. Any ideas?
Folks
Old sausage fingers strikes again. Whilst removing the headlights from my 124, to clean the glass. I managed to break the vacuum line connector flush with the headlight. This was actually my wife's fault as I knew she was going to complain about me cleaning the headlight glass in the...
Hi All, I'm missing a headlight washer which is an MOT failure over here. I have the new part but has anyone any idea how to get at it? It's not simply the nozzle, it's the complete assembly.