m104

Hi Guys I am potentially in the market for a 3.2 M104 engine in good condition. PM if you have anything of interest. Thanks Paul

M104 3.2 running ITB's, looks like those are BMW ones. Wonder how much difference it makes in hp/torque? Very interesting! YouTube - ‪Canal de bvlahov‬‏

hi i was out the other nite and the hose for the rad from botton right of rad to temp stat underneath rubbed of the powersteering pully and i had a leak only found out when i got home but on the way i heard a squeak which got faster the faster i went also the water light just came on about 100...

This I found incredible, Ssangyong in Korea (otherwise known as Daewoo) have a range called "Chairman". They have 2 ranges, "Chairman H" and "Chairman W". Check out these engine specs... Chairmain H (1997 to present, based on the W124 Chassis), available with these mercedes engine options...

What is the conventional wisdom on porting, polishing flow testing an M104 head? Will it make much of a difference form stock, or is it really a lot of money for little gain? My head gasket needs doing and I was wondering of this is something I should consider having done at the same time...

Afternoon all. Quick couple of questions - I've got a 75,000 mile one of the above. Recently parked the car on a sideways slope after a long run and the tappets rattled for a few seconds when starting the engine again. Guess the oil had run out of some of the tappets, perhaps due to the...

Right, I know I've not had my S124 E200 for very long but I'm really liking it... However, I know of an S124 E280 that will be coming available soon, and I'm tempted by the step up in power and (hopefully) refinement from the 6-cylinder engine, so I'm thinking about selling the E200 to buy the...

I have been doing a service on a mates 124 T (1995) and it has a really bad engine harness. He needs a new one but the best price i can find is $1500 AUD out of Singapore . Does anyone in the UK have a source for a better price for part number A 124 446 39 33 ? .

My 300CE-24 with the M104 CIS-controlled engine has had the typical 'start-up clatter' for quite a while. I'm not unduly concerned as it doesn't seem to be getting worse. Also, I am relatively sure it's not from the timing chain area and is thus likely to be just the hydraulic valve lifters...

Been rolling round under my car today changing the steering damper and have noticed quite a substantial amount of oil down the front end of the engine near the pulleys, down the left side of the engine, and sprayed along the bottom of the car/bottom tray. Oil levels seem to be fine on the...

Hi Gang, Spoke to an old friend of mine the other day. He has a 1996 C280 that his wife uses and has owned for 4/5 years now. Last week it developed a misfire and he was asking for anything obvious to check before taking it somewhere. I popped over to have a quick look yesterday evening...

How are you all doing ? I was wondering if any one could tell me where i could find a head bolt tightening sequence diagram.for a 1992 300 sl-24 with m104 engine.i am replacing the head gasket and i am at the point where i need to know this to finish. Thank you very much

Looking for an M104 Rocker & plug cover in good condition . Priority given to an AMG one .

Hi how are you all doing? Ihave a 1992 300sl-24 with the m104 engine.I am trying to replace the water pump Trying is the key word.Is there a trick to getting the pulley off and do I need to.Any help I can get would be greatly appreciated.I am missing too many topless days. Thanks for the help

Hi Having lots of probs with this car it never ends! Today driving back from Catford car would go over 90 once it hit that speed it would drop to 80 even with foot down! Autobox keeps poping on changes! Went to change valve cover gasket euros sent me wrong one! but checked all seals no oil...

Hi all, Right where do I start with this?? My 1992 300CE-24 will not start now as has been dead for some time so you know I have been process eliminating the fault by swapping parts from the 300-24 saloon which I know runs! Initially I diagnosed it to be fuel incorrectly so after swapping...

Anyone got one lying around they know works? Part number is A0041530028 :)

The time has come to call in the experts, so here is my little weekend teaser for you all... I've read many posts on this and other forums and spoken to two mechanics trying to solve a problem with my 300TE-24 and would appreciate some new ideas. The Car: - 1990 300TE-24, M104.980 (3.0...

here

Does the exhaust head flange on a m104 manifold fit on a m103 head?