offset

  1. R

    Wanted 19" Split rim type VI offset 30

    As heading, I know their rare, but would anyone have one genuine Mercedes AMG 19" split rim type VI wheel, offset 30. Dont really mind what condition the wheel in, as long as its repairable, as it is going to be refurb anyway to match the others. I only need the one wheel.
  2. W

    Please help me measure the offset of this whee

    I'm feeling like a bit of a blonker here. I took some information on trust and now something has gone horribly wrong. Following my cracked alloy saga I bought a new alloy. A Rota Slipstream 15x7 ET28. (this is the size I thought they were, being the same as used in the Ma5da series) I had this...
  3. C

    W124 Offset

    Hi all, Searched this but there seems to be some confusion as different models have different offsets? Basically, I need to know what my restrictions are with my 1987 230E. It's currently on standard steels, but I really don't like them. I really fancy "lattice" style alloys found on 80s...
  4. Howard

    Offset question

    Hi guys ... If i have a wheel that is ET 54 and i need to bring it down to ET49 , how do i do that ? I know that if it is 49 and i need to bring it to 54 , i can use a 5mm spacer , but how do you bring it down ? Thanks
  5. K

    VITO W639 Wheel size and Offset

    I am looking to replace the standard steel wheels on my newly acquired W639 Vito. It currently wears 16" wheels with 195/65 tyres. I would be looking to replace them with genuine Mercedes alloys of the same size with slightly wider tyres (205/65) and van rated. I believe the PCD size is 5 x...
  6. B

    clk w208 offset

    Hi all, whats the correct wheel offset for w208?? would a 42 be ok?:confused: regards John
  7. MOR8A

    Offset different for CLS 55 and E55?

    Hi Is there a difference between the wheel offset on C219 CLS55 and W211 E55? Thinking of putting on the 19 inch solid 5 spoke CLS55 rim onto an E55 and wanted to check to see if they were the same or if not does it make any difference or are there any problems that you are aware of in...
  8. C240AUTO

    W202 saloon et: & offset

    I WAS LOOKING AT USED WHEELS TO UPGRADE FROM MY ELEGANCE JOBS. WOULD 8J x 17 ET 35 FIT MY C CLASS 240? IF SO ANY RECOMMENDATIONS ON THE BEST RUBBER SIZE TO KEEP MY ROLLING RADIUS THE SAME/SIMILAR AND RIDE NOT TO HARSH?? CHEERS
  9. T

    Offset for wheels off a R107 SL

    Hi guys I'm looking at buying a set of alloys for my 190E 2.5 16V but the seller doesn't know much about them. I know they're 16x8J so reasonably wide but am not sure on the offset. They came of a 1980 450SL (R107), does anyone with a R107 with similar sized wheels be able to tell me what...
  10. E5car

    w124 OEM offset

    hi everybody.i have a w124 having 15x6.5 wheels and 205/60/15..the problem is that i can't find which offset are those wheels.can anyone help me plzzz thanks E5car
  11. Ninja bouncer

    lowest offset on a w203 (18's)

    i've had a good look at the chart but it doesnt help much with this Q. i've got myself some 18x8.5 W140 coupe rims for my 2001 C-class, these are a ET47 and dont actually turn on the front but im not sure how far i need to space them out. the face of the rim is nicely inline with the body...
  12. T

    Offset on w124

    How low offset can i put on my w124 coupe before the wheels will touch the body?
  13. V

    R129 Alloy Wheel Offset Question

    R129 Alloy Wheel Question Will a set of 17" alloys with a 25mm offset fit a R129 SL? MANY THANKS
  14. A

    Offset Question For W211 Wheels

    Folks, I have found a very nice set of 5 spoke alloys off a 2006 S class that look like they might fit my W211. They are 17 inch shod with 235 55 R 17's section tyres, alloys are the same width both front & rear (7.5j I think). Question is that they are ET43, and the current 16 inch wheels on...
  15. G

    Offset range and Bore size

    Few questions :confused: that i hope you can help with. :) Looking to get some alloys for a Honda that we have in the family. Been told i need the following: PCD : 5x114 Offset : 38 to 45 Bore : 64.1 What does the offset range mean? I can have anysize alloy aslong as the offset is in...
  16. ecossebev

    Offset explanation please

    I have a set of standard 15" wheels that need two to be refurbished, and I also need 3 tyres pretty soon. Looking on ebay, I reckon, for a few dollars more, I could get a nice set to compliment my '91 W124, however......the 15" wheels have an offset of 41. Does this mean only ET41 wheels will...
  17. O

    Wheel offset question for W208 CLK

    Looking at a set of genuine mercedes alloy wheels that measure 7.5 x 17 ET35 and 8.5 x 17 ET35. I have had a look on the wheel guide PDF but this ET fitment is not listed for the CLK. The company selling the wheels assures me they will fit but im not so sure. I want the car to have a...
  18. Niks

    Alloy wheels Offset

    Im rather confused about how the offset is calculated on alloy wheels so hoping someone could shed some light on this? For example, if we take two 17" alloys for a W124 and both are 8" wide, one has ET34 and the other has ET47 (remember this is an example as I do not know what the real ET...
  19. A

    Anyone know if this offset will fit my ML?

    Hello Could someone please tell me if this offset / size will bit my ML? Its a W163 ML350 currently on standard 17" Alloys and 275/55/17 ? tyres I think... REAR 9.5 x 20 offset 32 FRONT 8.5 x 20 offset 38
  20. ngenius1

    Offset query?

    Hi all, i have a chance to purchase some AMG type 2 wheels, 18x8.5 et44. Will they fit my 1993 320ce or will i need spacers? i also have a some tyres which i have lying around which i would like to use to bring down cost. 225-40-18, 265-35-18 yokohama a008. Will these fit on the rear? Thanks for...
Back
Top Bottom