• The Forums are now open to new registrations, adverts are also being de-tuned.

properly

  1. E

    E-Class -COMAND not working properly after windscreen replaced

    I don't know if anyone can shed any light on this problem with W213 widescreen COMAND. Windscreen had a crack and was replaced by MB main Dealer (at cost of nearly £700). After this, the COMAND is not fully working - after entering a destination the time does not count down as you drive to the...
  2. L

    C250CDI -11 not working properly

    So, just found out about this forum so i thought i'd ask here. The car has been to 2 Mercedes workshops, and they havn't been able to figure out the problem. When you turn the key in the ignition, the car starts like it's supposed to and engine fans etc speeds up. But it just goes into Idle at...
  3. milleplod

    Read the handbook properly...!

    I spent a good half hour this morning trying to get the instrument cluster on my R500 to display outside temperature rather than KPH....round and round (and round....) in circles through the menus, getting more and more frustrated. Then I realised that the speedo only shows MPH increments, and...
  4. Waggajag

    Door not locking/unlocking properly

    Not sure if this is the correct section so Mods feel free to tell me or move it. Whenever I try to lock or unlock the doors the passenger side works fine, but the drivers side just locks and unlocks rapidly. Eventually doing what it's supposed to do. On a previous car (Ford Fairlane.) this...
  5. L

    Brake lights on all the time - switch changed and set properly

    Evening all. My PITA W203 C 240 has a problem with the brake lights stuck on even with fuse 62 taken out. I've recently replaced the BAS/ABS module to sort out a BAS/ABS error which seems fine now. Doing that job I disconnected the battery and it's since then the brake lights are stuck on...
  6. K

    MERCEDES CL 600/ 2007 / Engine to fix properly , lost of power first gear !!!

    ANYONE CAN ADVISE A TRUE CL 600 / specialist engine please / South east of London or anywhere else in UK If necessary as long he is a true specialist , rare engine , hence ... Many thanks in advance
  7. whitenemesis

    Paul Dalton shows how to wash your car properly

    Mmmmm, with a sponge? SpUNglIi5A4 and then this?? qfEcgemCiyk Guess if you're going to polish the car after it doesn't matter...
  8. O

    Mercedes-Benz V230 w638 petrol, one cylinder not working properly

    Hi, new member here. I recently started having problems with V-class after I haven't driven it for a couple of months. First problem i noticed it was in limp mode probably caused because of one of the cylinders not working properly. After reading the fault codes(I'll post pics of them at the end...
  9. M

    c220 not running properly

    hi my c220 cdi has started chugging very badly at low revs. first thing in the morning when u start her she barely revs and moves off really slowly. however after a couple of minutes it seems to run fine although still doesnt sound 100% and mpg is down." she was serviced a month ago and...
  10. reflexboy

    Detailing-am I just slow or am i not doing it properly?

    Got myself a DA polisher a couple of years ago and have since done a Grand Cherokee, my SL and a Mini Cooper Clubman. I see several of you posting about detailing your cars and the various steps you have gone through and to be honest some of the pictures look stunning, but some of you guys spend...
  11. tonyc280

    Is my Alarm working properly W202 1997

    Not noticed really how many times my indicators flash when i set the alarm but i used to think it was two but now its flashing three times when i set the alarm. Any ideas chappies ?. cheers tony.
  12. imranrz

    W221 new tail ligts installed but not properly working

    Hi I bought original new shape tail lights of W221 2010 model & installed in my w221 2007 after connecting with the original connector only half of the break light working please advise how to fix it ???
  13. D

    C55 finally cleaned properly

    Well, almost...not a bad start. Some paint correction / claying. Not had time for the DA yet.
  14. jeffwebb

    Seat Belt not retracting properly.

    Can't find anything with the search button. The seat belt on my 169 is very slow to retract when I release it. I meant to mention it at the last service but forgot. Is this an easy fix? Any advice greatly appreciated. Regards, Jeff.
  15. V

    r107 instrument cluster - gauges not working properly

    I disassembled the instrument cluster of my 107 today to clean it. Upon putting it back together and reinstalling it, the following problems are happening: 1. the gauges in the left hand dial - the fuel gauge and the temperature gauge, are not working properly. they indicate the...
  16. D

    SLK washer jets not working properly

    Hi everybody, I've got a 2001 SLK230 and the 2 front windscreen washer jets are not working as I believe they should. When activated, very little comes out of the passenger's side jet in both directions. The driver's side produces a good stream in one direction and not very much in the...
  17. ShinyF1

    Windows XP not starting properly

    Windows XP on one of our laptops has stopped booting properly. All seems normal until you get to the login part - the Welcome page will not load and I'm left with the blue XP logo screen that preceeds it and it grinds to a halt [see pic below]. If I hit Alt + Tab once this screen appears it...
  18. Liloff

    DIY: How to PROPERLY fix the dead displays on the Instrument Cluster

    ...had some free time over the weekend! As you probably know, most of the W208 CLKs and the W210 models experience issues with the temp. and clock displays. I believe other models have the same problem. There is a simple reason for this. VDO are jerks and used cheap solution for the transfer...
  19. arkamelis

    bonet not closing properly

    hi all my bonet doesnt close properly in one side, i have to sit on it to hear it click, can i adjust anythink to make it close properly:wallbash:
  20. G

    Problems with my W124 200E '89, would not start properly

    Drove the car the day before all perfect without a problem! Yesterday wanted to drive it ... tried to start it ... it did not fire with the first time ... which was a bit weird... 4th time and up she goes... but the ABS light was on all the time on the dashboard and the car felt a bit jerky...
Back
Top Bottom