As the title really, prefer a W124 MANUAL coupe propshaft (no chance I suspect) or a W126 300 auto (that I can cut down and balance).
Any help greatly received (even ebay.de spots)
hi my car a c200 w202 year 95 it has 128,000 miles on it, ive only got it back on the road,it has manual transmission,when im changing gears from 1st to second,i hear a banging noise from the rear of the car,its like a back lash, i got under the car to check propshaft,and i noticed i could turn...
Hi,
What are the symptoms of these going bad? My car has been whining over the past few weeks and at first thought it was only between60-70 mph but no i can defo hear it at low speeds, I have popped it out of gear and it still whines, Its also stays contant at higher speeds but at lower i can...
Hi could anybody point me in the direction of a good parts supplier, I am after a front and rear propshaft coupling and center bearing for my 2001 E320CDI but cannot get the right part on ebay. They seem to do every other make model and year but not mine. I have been in touch with Blackburn...
hi again,trying to order these but havent a clue,sent pm to nice man from euro car parts who is trying to help me sort it.he has given me two part options but they depend on my oe part number which i dont know how to find orwhere it might be.he wants me to check and get back to him.this man has...
had my car on the lift today and my juddering nouse is the flex disc front and rear,checked euro car parts and they call them propshaft couplings,are they the same things.anyway seen kits for £52 are they any good..are the front kits the same as the rear?anyway everything else was checked and...
I had a vibration that i thought was coming from my propshaft i also had a wheel bearing noise going round corners it turned out to be partly due to this......
I hope it helps others, this was the inner bearing so only noticable if you remove the hub and grease seal, it got rid of most of my...
Evening all
I'm planning to change the prop centre bearing on my w210 e220 cdi and I'm wondering if it's easier to remove the whole assembly from the car or just unbolt the rear diff bolts and the bearing carrier and leave the front half of the shaft in place, would this be possible?
Bob
Do any of you chaps know the Part Number for the front propshaft coupling on a W124 for a 1990 300CE (or where i can look on-line)?!
Many thanks in advance!
Hi Everyone
I have a vibration when driving over 90km/h on my Merc W202 C180 after replacing the cluch and flywheel. It makes this drowning noise if I go over 90-110km/h and if I drive faster it really starts to vibrate the whole car.
I also had my wheel balancing checked as it fine.Front...
I'm new to this so please pardon any blunders here!
Please could somebody tell me with 100% certainty that the gearbox, propshaft and clutch of a 1988 230TE are exactly the same and therefore transferrable to a 1990 200TE. They are both estates.
Here's why:
Since I bought her for £500 two...
I have looked under the car as I need to see what going on with the prop/ donuts/ uni joint but there is a shiel hidding it, and it look like its screwed from the inside of the car, this could not be right, could it? I don't want to start to take the carpet out to move the shield...
What is the...
Just back from a wee trip and there is a clung, it feel like the prop shaft. There was a wee play awhile ago. I was told to tie up the bolt on the prop, but how do I access it? It's protected with a heat shield and it look like its bolt from the inside... Any hint?
Thank you
Hi all
I got an advisory 2 services ago that my rear propshaft bush has slight wear on it. That was now 25k ago so I plan to go under the car and see how bad it is so I can get it sorted. Is it a visual check or how can i asses the condition of the joint?
The car is a 1999 C200 auto with...
Hi all, another problem for you please. My 300CE has developed a quite alarming knocking sound when driving - it has been coming and going for a while, but seems to be there all the time now. I was told a while ago that the centre propshaft support bush would need changing but the local garage...
I have a W202 1998 C180 Manual gearbox. If I accelarate hard or lift my foot off the accelater pedal quickly, the car doesn't react smoothly. Get a jolting effect. Engine is running fine, so after looking a previous threads, wondered if it could be propshaft related. Could this be a worn...