pulley

I own a w203 with the m111 e20 ml evo engine. I currently run a 23cm crankshaft pulley but I need more hp so im thinking of upgrading to a 24cm pulley. are there such pulleys available ?

I currently run a 23cm crankshaft pulley and Im thinking of upgrading to a 24cm. is there such a pulley available ?

I've read hundreds of threads over the months on this subject with people saying they are no good and people saying they are. People saying they notice a difference and people saying there will be no difference. I'd like to hear from people who have or have had them installed, my main concern...

I have finally managed to track down the tool for the alternator pulley(Amazon of all places). The question now is there a bolt holding the pulley on, therefore do I loosen with the ratchet while holding the pulley still. Just checking as mine seems to be very tight and do not want to break...

Ok so basically I need to replace my supercharger pulley, I have removed belt, and even removed the bolt, plastic disc, and the shims. But now I'm stuck! Why won't the pulley come off? Help needed badly!

...fell off!!! Following this thread ( http://www.mbclub.co.uk/forums/engine/117207-w210-e320-cdi-alternator-pulley.html ) posted yesterday. Today the pulley fell off. The pulley started chirping on Sunday. On Monday my Indie advised it was the alternator pulley. I started my research...

...part number. The Russian site is not good for this, could someone look it up for me please. Thanks.

Changed both tie rods and ball joints and my fuel consumption increased. Had the tracking done after 1000 miles and my fuel consumption has returned. How? While I am on here is there a tool for removing the alternator pulley as I am trying to renew mine? What is the size of the brake bleed...

Hello all, I thought I would post a quick note up to see if anyone knows where I can get hold of a crank pulley holder for the job? I dont want to spend £100 on a tool! At the same time I have to do the TCU on the transmission and the the oil seals on the oil cooler. The oil cooler is...

Went to Ian at 124works in Kirkham on wednesday 22/06 as my front breaks were seized and I couldnt get them released, not a problem for chris though and fitted me in presto again.By the time I got there from Wigan parts were waiting to be fitted, front and rear brake pads / front discs ...

Only ever seen these for sale in Germany before, but here's one in the UK, anyone used one? Mercedes C / CLK / SLK Kompressor high boost pulley kit on eBay (end time 12-May-11 00:47:48 BST) Same seller has loads of other Merc bits too, tempted by the interior but cant be bothered to collect...

Only ever seen these for sale in Germany before, but here's one in the UK, anyone used one? Mercedes C / CLK / SLK Kompressor high boost pulley kit on eBay (end time 12-May-11 00:47:48 BST) Got loads of other bits too, tempted by the interior but cant be bothered to collect...

Changing my belt tensioner, and idle pulley, on the idle pulley, which way to undo? right, or lefthanded thread?

The belt tensioner pulley on my recently purchased 1990 300td is out of alignment with the other pulleys. It sits further back towards the engine than it should, so the belt is off the front edge, and is wearing out the newly fitted belt. Any tips would be much appreciated! Also, the engine is...

Any one recomend best supplier for a smaller pulley and map on a c32? Any one had it done? What do they perform like Thanks

Please can some one point me in the direction of some one who sells these, I assume after this is fitted the car will need remaping so any info on anyone you can recommend in the Nottingham area would be great. Thanks Elliott

Hi all, I need to change the tensioner pulley on my '92 190E (2.0) but unfortunately the hex head bolt appears to be slightly rounded off, so the only way I can see of removing the pulley is to take off the whole assembly and order a new bolt from Mercedes. My Haynes manual doesn't cover this...

I have used the search function, but i am after some up to date information please. I have heard Kleeman offer a pulley upgrade for the 230k what bhp gains are realistic and would the car then need to be remapped after the pulley install? If any one has any good links to 230k upgrades then...

Hi everyone, I have a 1982 230E which needs a new water pump, but I can't for the life of me get the water pump pulley off. I have removed the fan and what you see in the photos is what I am left with. It says in the workshop manual that the pulley should now just pull off by hand, leaving the...

Just had belt and tensioner pulley replaced by an Indie on my w202 c220cdi as it was flapping, and was shocked at the price of the pulley. The pulley replaced was the one in the far left corner, looks like its made from metal and quite small. What is a fair price for this part...