steel

Hi, I need a set of steel wheels, tyres can be bald but need to be inflated, so I can get rid of the W124 shell :) Cheers Adrian

My exhaust tailbox has rusted through so I am looking for a replacement. The official part is £252, but I am planning on keeping the car for years so think that a stainless steel replacement may be a better bet. I have had a quote for £205 for a Remus tailbox but am a bit concerned that it...

Anybody got 4 standard steel wheels to fit a 190? Don't care if the tyres are completely illegal as the car will never go on the road again. I'm removing the Lorinser's currently on it in the hope they're real & just need something for the car to sit on so it can be moved around on the drive...

can anyone tell me if Is the new SLK's Roof Aluminium or steel? just wondering because one I am looking at has a chip on the roof rear pillar. if it is Aliuminium then I won't worry about it. cheers MJI

Was driving along some A road in Oxford the other day trying to avoid the roadworks at the Headington roundabout when all of a sudden without any prior warning, my exhaust falls off on the C250 :eek: Had to stop in the middle of the road, jump underneath and remove the exhaust! The pipe...

due to some fairly bad kerbing,i'm in need of a couple of wheels,anyone got any going cheap cheers mick

I beleive MB direct fitted these parking sensors last year when I bought the car. http://www.steelmate.co.uk/pts800mn/pts800mnlarge.htm After several attempts to contact MB direct for a manual, gave up as they never returned my calls. :crazy: Does anyone have a manual they can copy and...

These are mine and I am just trying to shift them if anyone's interested, they all have Michelin Pilot tyres all with practically no wear!!! Ebay Link Thanks

Not much interest as yet but could come in use for someone as theres always someone needing steelies whilst the alloys are in for refurb ;) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10398&item=4558489238&rd=1

Surely these are useful to someone wanting to send their alloys away for a refurb or to use with snow chains? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10398&item=4553086841&rd=1

Im after a set of steel rims to fit on a vw T25. What im after is 15" rims with a part number starting 202, and an ET between 30 & 40. I think from a C class, such as a W202. So, if anyone has swapped their wheels for alloys, and want to sell their steel rims, then email me ([email protected])...

Having a garage clearout .I have a set of 2001 c class steel wheels 195/65 /15 with tyres Any offers/ Mike

anyone want them? 2 brand new (budget) tyres and 2 with about 10K left in em all 185/65/15's. Live in Crawley Not sure if I even want any money for em, just don't want to dump em....seems criminal!

I went to Elite to get two need tyres and I love the replacement exhausts. Remus around £300 for the back box AMG lookalike. Would this effect the insurance a lot? I know Jimmy like it for the looks and noise. Thanks Rirhill

For sale: Twin tail pipe design stainless steel Remus performance exhaust for 202 C250TD part number: 509097 0548 Fitted to my car about 6 months ago but has done no more than 4-5K miles. Looks really cool and sounds nice too. Have a look at the Remus website: Mercedes C250TD Its the...

Please help me deciding. According to the manual I should choose: 6jx15 ET31 or 6,5jx15 ET37 or 7jx15 ET42 I am offered by my dealer a 7jx15 ET42 for ~35EUR a piece. Would it fit my car and wouldn't the difference in ET settings harm the bearings?

I suspect the answer to this is going to be a no but I'll double check. I need to get my alloys refurbed and need some replacement wheels to use for the couple of days they are in the shop. I've been offered some 15in steel rims from a 1999 W202 to use whilst my AMGs are being refurbed...

I need to replace my exhaust system. I really wanted to go for a stainless steel system however the universal cats arent very good and dont come with any warranty, the exhaust comes with lifetime warranty. What i wanted to know was if any one has reaplaced thier exhaust system on a diesel...

Hi there, some of you might recognise me from the wheels/tyres section where I've been ranting and raving about a set of alloys that I've just had put on my 190e. Anyway, The original steel wheels that were on it are for sale along with the wheel trims. The tyres have very good tread and...

I have a 190E with 15" alloy wheels, 205/50/15 tyres, not brilliant but legal. Anyone in South Wales area interested in a part ex for steel wheels as I am terrified of clipping a kerb!