valve

Does anyone have any idea how much it would cost to have the valve cover gasket replaced on a Mercedes ML270 CDI year model 2004 Also cost of replacing the poly v belt on same car. Mercedes independent garage or Mercedes Dealer cost or both. Gary

Hi folks, After looking up what I can find on heating issues (centre console too hot to touch and nothing but hot air in the rear of the car), I figure the heater control valve has gone. I've got a new one, stripped out the necessary to see the thing including all the wiper drive, but it looks...

Hi Guys I am just gathering some interest if anyone would like to TCU remapping on the 7 Speed AMGs, both Converter and MCT based Transmissions are supported.Increased Line Pressure, Faster Shifting, More Precise Shifting. Your valve body, it is modified using our proprietary techniques to...

Manifold + X Pipe and Rear Boxes with Race Cats IPE

Hi. I am new to the world of mercedes and have fallen in love with logical way these vehicles work and are put together. However I cannot find a book/ manual on my car. I need to adjust the valves but I don't have the gap info. Can someone provide me with the valve clearance for the 1984 230e w123?

Hi does anyone know the price of the turbo solenoid valve A 000 545 05 27 on a w209 270 cdi please I get an intermittent mil light and have read the code to double check it was this part at fault I cleared the code and then disconnected the electrical connection then read the code again and it...

Does anyone know where i can find the erg valve on a 05 115 vito.Is it just behind the turbo on lefthand side of engine or on righthand side under diesel filter.Thanks:confused:

Hello, Does anyone know if the C63 AMG has an exhaust valve? Would like the option to switch it to noises as and when required. Thanks EJ

As per title, required for facelift 2000 model, part no. A6130980117 Must be fully working Thanks

Hello, can anyone advise on where I can get hold of a gearbox valve body for my s124 E320? Any information would be greatly appreciated. Thanks

I believe my Duo Valve is faulty as there is very little heating although cooling is fine. If I were to find a used one can they be fitted fairly easily or do they need to be programmed to the car like an alarm module etc. Any ideas of a good place to get one from? S320 2004...

Looks like a good example. Is that a good price for one of these? Mercedes w124 estate e300 diesel multivalve, the best currently available? | eBay

Hi can any one tell me if their is some body who repairs reconditions Throttle body's my 1991 suffers from delays in accelerating my indie has done some good work to the car but advises it needs to be replaced , I am aware the new unit is in excess of £I k reluctant to buy a second hand on...

Over stock ........... a few available. Mercedes Quantity Control Valve Y/94 A646 074 0084 A6460740084 | eBay .

Hi All, Would anyone know of anyone - up north if possible - who could change the valve seals on my 280CE. Thanks in advance. Cheers, Paul

Anybody got a non leaking Fuel Shut Off Valve, A6010700546, for an OM606 engine as fitted to later W124's? Thanks, Andy

Hi all. The gaskets on my 2003 e55k are weeping slightly I can smell oil burning from os after a good run. I am in west yorkshire can any one recommend some one to do this for me. And how much would it cost.. I am in the parts buisiness so it would be labour only. Cheers.

Folks I have LPG Gas at my home which is only used to supply a cooker hob. This runs of two 19Kg cylinders which sit outside the house and are connected via a switchable regulator (bolted to the wall of the house) which is connected to the cooker. The regulator is a simple switchable...

Hi, I've recently bought a 1997 Mercedes W210 E300 TD. It recently developed a diesel leak from the pressure valves. I replaced both the o-rings and the copper washers on all 6 cylinders. I removed the copper washer seat with a magnet and the valve seat came out too. I put them back in and...

Just changed the valve due to the arm on it breaking. The car now seems to sit normal at the rear when stationary but the front sits high. when the car gets up to 40/50 mph the front seems to go lower making the rear seem higher. Is the valve the only thing that maintains pressure to the...