04 cl500 abc question

alan13henderson

New Member
Joined
Jul 12, 2012
Messages
34
Location
Great bentley Colchester way
Car
11 ml350 sport, clk320 convertible 51, tvr chimaera, Yamaha 1300xjr
Very near to purchase of a cl500 215
Although no signs of any problems on the 2 I'm considering 60kand70k miles showing. Can a reasonably experienced home mechanic work on the abc systems? Ie could I replace the pump or struts myself or is it all permanently pressurised etc
Is there a mileage or age these things typically fail at?
Any feedback appreciated
 
As someone who has toyed with the idea of a W215 CL500 I have investigated the money pit aspect of these beautiful cars, in particular the Active Body Control. Scared by the horror stories of struts at one thousand pounds a corner and the pump itself at sixteen hundred pounds, I came across a place in Liverpool, via an American website, that refurbishes the balljoint at the base of the strut which often cures the warnings.

It would seem the balljoint wears out, and the excessive movement this causes sends contradictory information to the ABC computicle via the sensor in the strut itself, generating the 'Visit Workshop' warning. The balljoint isn't a separate item, so the whole strut has to be replaced.

The workshop in Liverpool refurbishes the balljoint by replacing the plastic compound that wears and breaks up inside the joint, provided the wear hasn't become so bad that the metal surfaces have been damaged.
 
Been looking at these myself, hour after hour and the things you read online really have put me off.

Such a shame as I really want one!!
 
^^^ I share your pain!!!

I've even investigated the BMW 840 and Porsche 928 because of the tales of woe.
 
bigmacplease said:
Been looking at these myself, hour after hour and the things you read online really have put me off.

Such a shame as I really want one!!

The thing is online you will only ever hear horror stories .. Nobody come n and says its been running great... Be nice if you could get some idea of the ratios of these things cropping up ..ie we sold100k or them and replace 120 ABC struts over past 5 years..or whatever..
 
one thing to remember

As someone who has toyed with the idea of a W215 CL500 I have investigated the money pit aspect of these beautiful cars, in particular the Active Body Control. Scared by the horror stories of struts at one thousand pounds a corner and the pump itself at sixteen hundred pounds, I came across a place in Liverpool, via an American website, that refurbishes the balljoint at the base of the strut which often cures the warnings.

It would seem the balljoint wears out, and the excessive movement this causes sends contradictory information to the ABC computicle via the sensor in the strut itself, generating the 'Visit Workshop' warning. The balljoint isn't a separate item, so the whole strut has to be replaced.

The workshop in Liverpool refurbishes the balljoint by replacing the plastic compound that wears and breaks up inside the joint, provided the wear hasn't become so bad that the metal surfaces have been damaged.


Please remember that W215/220 struts are different to those fitted to SL R230. The balljoint is SL specific. :thumb:
 
Indeed. The repaired balljoint you end up with is the one you send for repair. It never leaves the end of the strut.

As far as I can gather, they remove the old plastic material from the joint, drill a hole in its rear and inject new molten plastic under high pressure. You also end up with a grease nipple. Remember them?
 
I do indeed understand that but when there is such an overwhelming amount of people complaining about problems it starts to put you off.

I have spent so many evenings looking at countless threads on different sites and it seems to be a lot of expensive problems.

Sadly you can never get that sort of information of percentage owned and percentage failed.

I don't think the issue is that they were poorly made its just with there being so much technology that when things fail like they do on any car it costs you a fortune!
 
The 215 cl has a ball joint at the bottom of the strut but it is part of the camber arm which is a seperate part costs around £250 per side held into the strut with 2 grub screws ( can be seized in ).
It's the sl 230 which have it in the bottom of the strut & it's a fixed ball joint which requires refurb of full strut replacement.
 
CL strut can be changed yourself in around 2 hours, its like taking off a normal strut but you have to bleed, then undo a quick release line in the process.

Not sure about the pump though.
 
You can replace the struts on abc yourself and send the vehicle up and down a few times to bleed the air out, valve body or pump require rodeo done via a diagnostic machine as does a fluid change, I to was put off a w215 just because of the abc system even though when it works its a great system.
 
I bought a CL500...

and the first thing that happened was an abc pump failure... a refurb fitted for around £1k... not great but the seller was very decent and contributed.

Since then I've done about 12,000 miles and regularly see over 20mpg ;) and in terms of maintenance I've spent more on hot Fords and Peugeots on a £ per mile basis.

Yes, I pray to Stuttgart regularly but I find it odd that people are so fearful of spending £1k to £2k on maintenance but don't worry at all about spending twice that on depreciation.

And if the worst happens it'll be in bits on ebay so all will not be lost.
 
thanks to all for input.
Im planning to view/test drive a couple at the weekend, both facelift cars.
Plan for me would be to keep service history up to date but paying garage to do as little as possible with me doing most of the work where possible.
 
thanks to all for input.
Im planning to view/test drive a couple at the weekend, both facelift cars.
Plan for me would be to keep service history up to date but paying garage to do as little as possible with me doing most of the work where possible.

You'll love it! :bannana:

Matt
 
Didn't Mercedes Enthusiast do a feature on the C215 recently? Their source (can't remember the name of the Indy) reckoned that the ABC struts on these do not give much bother, compared to those on the R230. There was a problem with the wiring loom for the doors due to the complex hinge on it, but apparently MB have developed a repair part for that. I wouldn't have much faith in anything that ME say, but this information did seem to come directly from the Indy, so may be reliable.
 

Users who are viewing this thread

Back
Top Bottom