202 heated seat switches and plug

[poormansporsche]

Alright peeps

Like it says, and plug from loom so I can knock a loom up



Cheers

Brett

 

[Andy_C]

Hi,

You'll not just need the switches, there is a timer/control unit associated with the switches.
Depending on whether you've got an early or late 202 depends what type of switch/timer unit you'll need.
Cheers,
Andy

 

[poormansporsche]

Having aftermarket heated seat kit fitted so most likely just going to be "on and off" just wanted the oem switches and plug to see if I can splice in - may not be possible. So the more basic switches will be better

 

[andy27168]

Hi,
If you get the switches that were fitted on the dash of a 202 as opposed to the early ones that were fitted on the centre console, the control unit is built into the switches.
All you will need do is to run a couple of wires to the seats from the switches and one to the fuse box, and spur off the illumination feed.
With retro fitted seat heaters these switches should work perfectly and as exactly as OEM.

 

[poormansporsche]

Cheers mate, will do

 

[NW_Merc]

Do you know what the part numbers are for a pre-facelift wiring loom - i.e. square switches, or will I have to use the W140 part?