• The Forums are now open to new registrations, adverts are also being de-tuned.

Alloy Wheel Refurbish

normanr

Active Member
Joined
Aug 14, 2006
Messages
757
Hi Guys
I know this has been done before (as picture).
I did it this way as I was able to tuck the tape right under the rim of the wheel,I bought some cheap masking tape from Pound savers (4 for a pound).
 

Attachments

  • cars007.jpg
    cars007.jpg
    58.1 KB · Views: 198
  • P1010247 tape.jpg
    P1010247 tape.jpg
    15 KB · Views: 195
  • P1010248 tape.jpg
    P1010248 tape.jpg
    38.2 KB · Views: 194
Continue from ist one.
I went round the wheel using a small piece of tape at a time and when I finished I went round and pushed the tape under the rim with a blunt screwdriver.
Then I cut the plastic to cover the rest of the wheel and sprayed away,the finished picture shows some marks around the centre cap but it must have pixilated a bit because there are no marks on the actual wheel.
I tried using just plastic but found it awkward to get it under the rim nice and tight.
This only took an hour to clean, tape up, and paint so not to bad on a nice day as it is today.
I did this in two sections because it said I had used my picture quota up,probably doing something wrong
 

Attachments

  • P1010246 ist.jpg
    P1010246 ist.jpg
    77.1 KB · Views: 194
  • P1010252 tyre 2nd.jpg
    P1010252 tyre 2nd.jpg
    75.5 KB · Views: 194
  • P1010250 tyre last.jpg
    P1010250 tyre last.jpg
    75.3 KB · Views: 196
Good job there mate, well done :bannana:

Will
 
Great job.
 
Thanks for the comments guys but I don't think I should have done it because I have made it rain.
It is peeing down in Bristol (good old global warming I DON'T THINK):eek:
 
What paint did you use? how long did it take?did you laquer aswell.
Might just have a go at mine.
 
Norm - woah!!!!! Stop - the paint's melted your wheel:eek: :eek: Started off a nice flat style rim - and now it's not:eek: ;) :devil:
 
Norm - woah!!!!! Stop - the paint's melted your wheel:eek: :eek: Started off a nice flat style rim - and now it's not:eek: ;) :devil:

LOL
 
I was wondering why the wheels had changed design too !!
 
Blimey Pammy
I wondered why they wouldn't fit,that paint was stronger than I thought.
:confused: :bannana: :bannana: :bannana: :p
 
Hi Kelvin01
High melting paint LOL and laquer I did paste and copy for that, is that how it is spelt.

Seriously though ordinary alloy wheel paint and yes I did Lacquer them (It was spelt right went into word and did spell check) oh to be edukated.:o :eek: .
Norman
 
Last edited:
The wheel looks great norman. Well done.
 

Users who are viewing this thread

Back
Top Bottom