• The Forums are now open to new registrations, adverts are also being de-tuned.

Comand System Fault Codes

KP090

Active Member
Joined
Oct 31, 2012
Messages
70
Car
Mercedes 06 CLK 280 Sport
Hi guys,

Can someone please help me with my comand unit, its for a 2006 clk280. The system is a NTG2 (i think)

The system keeps turning on and off and not responding, did all the fuse checks etc.. cant really afford to buy a new unit or one off ebay as ive got service b and brakes and gearbox stuff to do which will be around 1k.

The fault code readings i got yesterday from a star machine are:

AGW - Audio gatway:
D101 - MOST component at position 1 reports open ring. Status stored.
D146 - No or incorrect CAN message from control unit N73 (EIS [EZS] control unit)
D010 - The supply voltage of the control unit is too low

Comand or Audio:
D200 - At least one button is sticking or was activated for longer than 120 seconds.
D010 - The supply voltage of the control unit is too low.

CD changer
D001 - Watchdog error: The control unit has been reset due to an internal error
D710 - CD store fault: CD magazine is not ejected

SOUND - Sound system
D010 - The supply voltage of the control unit is too low
D811 - Component fan is faulty or the lead has open circuit

The supply voltage is due to a flat battery but since got a new one fitted.

Can someone please help? Comand online has said its probably a faulty unit, do you think its worth going main dealer to see what they say maybe something more specific or a waste of time and money?

Thank you in advance

Kunal
 
according to the website you are looking at £165 for your repair. Worth a try I would say. I just emailed them will let you know.
 
he got back to me. Says its a flash problem or processor, but the processor is not repairable.
 

Users who are viewing this thread

Back
Top Bottom