Chris Merc E320
Active Member
- Joined
- Mar 17, 2008
- Messages
- 154
- Location
- Gloucestershire
- Car
- E 320 cdi Avantgarde 5 door,W208 Clk 4.3 V8, BMW E30 325i Cabriolet
I cannot get my W210 (11/99 built) Comand unit to read a Sat Nav cd or play an audio cd.
Thanks for all the help to date, I've removed the Comand unit, dismantled it as per forum advice, cleaned sat nav rollers, cd lens and reassembled all ok.
The Comand unit now accepts and ejects cd's (which it did not do prior to cleaning of rollers) but still will not read a cd.
I have removed the correct main fuse (no.5) from beneath the N/S rear seat fuse board, and for good measure removed the fuse from the back of Comand unit, I left the unit for 5-10 minutes powered down (checked by trying to switch Comand on but no power) then reinserted the fuse into the fuse board but the Comand unit still will not read a Sat NAV cd (supplied by MB brand new last week, don't ask cost
).
So I am stumped.....any advice is welcome on anything I should try or have missed in the hope of getting the Comand sat NAv function working.
Failing that can anyone recommend a competent person to check and repair my Comand unit.
All advice warmly welcomed.
Thanks Chris
Thanks for all the help to date, I've removed the Comand unit, dismantled it as per forum advice, cleaned sat nav rollers, cd lens and reassembled all ok.
The Comand unit now accepts and ejects cd's (which it did not do prior to cleaning of rollers) but still will not read a cd.
I have removed the correct main fuse (no.5) from beneath the N/S rear seat fuse board, and for good measure removed the fuse from the back of Comand unit, I left the unit for 5-10 minutes powered down (checked by trying to switch Comand on but no power) then reinserted the fuse into the fuse board but the Comand unit still will not read a Sat NAV cd (supplied by MB brand new last week, don't ask cost
).So I am stumped.....any advice is welcome on anything I should try or have missed in the hope of getting the Comand sat NAv function working.
Failing that can anyone recommend a competent person to check and repair my Comand unit.
All advice warmly welcomed.
Thanks Chris
