door lock bouncing up and down

Page may contain affiliate links. Please see terms for details.

peteubhi

Member
Joined
Apr 24, 2011
Messages
48
Location
uk
Car
E270 CDi W211
hi i have a w211 and the rear passenger side door pin bounces up and down when locking and unlocking.
I have read that a spring needs replacing in the ACTUATOR?
Does any one please have a picture guide as to how to replace this spring?
 
thank you giantvanman, do you know if its the same procedure for the rear doors? do i have to remove the door handle and remove the rivets?
 
I haven't done this with an MB but to get to the mechanism/lock/etc you need to remove the door card/door panel. I would guess yes to handle, likely to lock button and door opener. The panel/card is normally held on with push fittings but check for screws because I haven't done this on an MB!

EDIT: This is the tool to pull the trim/card/panel away from the door http://www.amazon.co.uk/dp/B005DQ7ZEU/?tag=amazon0e9db-21 . I have used a wallpaper scraper before but that is not a recommendation!
 
Last edited:
Dont forget to get the forum discount code that I have put at the bottom of the post.
 

Users who are viewing this thread

Back
Top Bottom