Installation of Android Auto/Apple Carplay with COMAND NTG4.0

[SeeDaRipper]

These devices take their power from the multiplug that feeds power to the head unit. A socket accepts the original multiplug, and a new multiplug on the other end of a short breakout harness then plugs into the head unit. So there's no need to tap into a separate fuse.

Thanks, so any idea as to where i put the ACC and BAT terminals then? (My car is in my bio) TIA

 

[Gollom]

The W204 pre-facelift (up to 2010) had NTG4.

The W204 facelift (2010 onwards) had NTG4.5.

These are two very different systems and they are not interchangeable.

Check with the vendor of they have a solution for W204 with NTG4.5.

Yes, it is NTG4.5. Thanks

EKIY Wireless Carplay For Mercedes Benz W207 E Coupe 2011-2014 NTG4.5 With Android Auto Interface Mirror Link Airplay Functions - AliExpress 34

Smarter Shopping, Better Living! Aliexpress.com

vi.aliexpress.com

 

[Gollom]

The W204 pre-facelift (up to 2010) had NTG4.

The W204 facelift (2010 onwards) had NTG4.5.

These are two very different systems and they are not interchangeable.

Check with the vendor of they have a solution for W204 with NTG4.5.

Do you happen to know the size of the NTG4.5 screen on a facelift W204? I know on some screens you measure diagonally

 

[markjay]

Do you happen to know the size of the NTG4.5 screen on a facelift W204? I know on some screens you measure diagonally
View attachment 162823

COMAND is 7.2"

Audio20 is 5.8"

 

[Gollom]

COMAND is 7.2"

Audio20 is 5.8"

Ignore me - think I am having a senior moment......

Thanks

Not doubting you, but that sounds the wrong way round? The options given in above pic are 5.8 and 7.2 - my NTG4.5 is certainly COMAND surely?

527 COMAND DVD APS WITH NAVIGATION

 

[markjay]

Ignore me - think I am having a senior moment......

Thanks

Not doubting you, but that sounds the wrong way round? The options given in above pic are 5.8 and 7.2 - my NTG4.5 is certainly COMAND surely?

527 COMAND DVD APS WITH NAVIGATION

As of NTG4.5... they are all called 'NTGxx'.

So you have COMAND Online NTG4.5.

And you have Audio20 NTG4.5.

 

[Gollom]

As of NTG4.5... they are all called 'NTGxx'.

So you have COMAND Online NTG4.5.

And you have Audio20 NTG4.5.

Aggggh - my brain hurts now! So what size is the screen I have then!

 

[markjay]

Aggggh - my brain hurts now! So what size is the screen I have then!

527 COMAND DVD APS WITH NAVIGATION

7.2"

 

[ChrisPDuck]

Do you happen to know the size of the NTG4.5 screen on a facelift W204? I know on some screens you measure diagonally
View attachment 162823

When I fitted a similar unit into my 2010 S212 (NTG4) I tried all these DIP switch settings in turn, but couldn't get the display to work. I found out you have to completely kill the power to the unit for the new DIP switch setting to take effect. The best way to do this is to pull out the plug carrying the power. The seller advised to leave it for one minute before plugging it back in, but I don' think it needed that long.

I also discovered that my Audio AUX wasn't enabled, and the option was greyed out in engineering menu. The process to enable Audio AUX in my car is shown in this video:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

If you need to do the same (unlikely I guess since yours is a later NTG version), note that it's a good idea to make a note of the TGW parameter settings before you turn off MOST, since they will all get reset when you turn it back on.

 

[markjay]

Your car is equipped with:

527 COMAND DVD APS WITH NAVIGATION

Which is:

COMAND Online NTG4.5 (with 7.2" screen)

Simple...

 

[Gollom]

When I fitted a similar unit into my 2010 S212 (NTG4) I tried all these DIP switch settings in turn, but couldn't get the display to work. I found out you have to completely kill the power to the unit for the new DIP switch setting to take effect. The best way to do this is to pull out the plug carrying the power. The seller advised to leave it for one minute before plugging it back in, but I don' think it needed that long.

I also discovered that my Audio AUX wasn't enabled, and the option was greyed out in engineering menu. The process to enable Audio AUX in my car is shown in this video:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

If you need to do the same (unlikely I guess since yours is a later NTG version), note that it's a good idea to make a note of the TGW parameter settings before you turn off MOST, since they will all get reset when you turn it back on.

Thanks for this. I seem to remember you mentioning this before, hence the question re screen size so I could set it right at the beginning

Suspect I may have a few more questions soon...... LOL