My E55k Dyno run

[Dogbreath]

Just got back from the rolling road local to me where I went to get base figure before I start any upgrades.
The car made a max of 466.2 @5150 rpm and 559.2 ft.lbs @3100 rpm
These runs were made at the end of the session when it was worked out the best mode to run in. Car was quite warm and it was a very hot day outside so mapping guy said it would easy be stock power or over with a cooler day....?
So all in I'm chuffed as it was only 3 Hp down on stock and over 50 ft.lbs above stock on MB figures. Does this sound about right ?
Lee

 

[Alex]

Sounds good. What do you plan to do upgrades wise?

 

[AMGeed]

Decent figures there Lee. Looks like you have a nice strong engine to tune.

 

[Dogbreath]

I'm just going to do the tried and tested, headers, smaller pulley, Remap, the exhaust has been done already but I'm going to do a few cooling upgrades first!
Lee

 

[Dogbreath]

Decent figures there Lee. Looks like you have a nice strong engine to tune.

Thanks Roger
Mapper guy loved the engine and mentioned the rather large torque figure for a stock engine as crazy....lol
He usually tunes VW/Audi/Porsche cars.
I've got some videos but need to workout how to put them on here...!

It's started now, onwards and upwards..... New wheels can wait, I've got the bug again.....:bannana:
Lee

 

[AMGeed]

Best to upload the video to Youtube or Photobucket and post up the URL link.

Got my dyno run at MSL on a Dyno day back in Aug '14. Very similar figures to yours at 478bhp and 571ft lbs. Its not mapped so I'm happy with that.

If you are interested, my car appears at 7min 02 on the video made on the day.
Most of the guys still have the cars featured.

[YOUTUBE]/watch?v=GpkcZXMFyTs&list=FLeZPRuQz-72Buhrj0HwAVuQ&index=29[/YOUTUBE]

 

[Dogbreath]

Right I'll try with YouTube.
Regarding the figures, do you think the extra torque comes from the exhaust as that's what we both have and as you say quite similar numbers wise .
Have you got another link for vid ? Won't let me play it....unless it's my iPad? Will try on laptop in a bit

 

[AMGeed]

Try the link without embedding. Re the torque, the exhaust could account for some of the extra, but mine is circa 70ftlbs extra. I like to think its just a healthy engine

https://www.youtube.com/watch?v=GpkcZXMFyTs&list=FLeZPRuQz-72Buhrj0HwAVuQ&index=29

 

[Dogbreath]

Awesome vid
Absolutely love it Roger..... Some monsters there....!

 

[nickjonesn4]

Start of a slippery slope!!!

Great numbers to start with.

 

[Dogbreath]

Start of a slippery slope!!!

Great numbers to start with.

Yes that's my fear Nick...lol
I said I'd never do it again, when owning my skylines I once Bought a 3.0l short block for £1250...... £20k later I had a 900+ Hp car.....

Im too old for tHis now tho....550-600 will do me... Actually feels faster enough now but......... :bannana:
Lee

 

[C43AMG]

Best to upload the video to Youtube or Photobucket and post up the URL link.

Got my dyno run at MSL on a Dyno day back in Aug '14. Very similar figures to yours at 478bhp and 571ft lbs. Its not mapped so I'm happy with that.

If you are interested, my car appears at 7min 02 on the video made on the day.
Most of the guys still have the cars featured.

[YOUTUBE]/watch?v=GpkcZXMFyTs&list=FLeZPRuQz-72Buhrj0HwAVuQ&index=29[/YOUTUBE]

Thanks for that as I must have missed this video, the CL always looks great on camera + the gain on bhp and torque was very impressive