• The Forums are now open to new registrations, adverts are also being de-tuned.

Numberplate light leftside w211

Ronny85

Active Member
Joined
Jan 7, 2016
Messages
96
Car
W211 e270 cdi
Hello everybody.
I changed my LED bulb to ordinary bulb(led was MELTED a littlebit, but it was working) in my left and right numberplate.
My right side bulb work, but my leftside bulb wont turn on(i have used one voltmeter to messure the power, but is was zero)
And under the carpet, in trunk, i have removed everything, and i CANNOT fine one broken wire.
What to do now.
I changed my positionlamp, and numberplate lamb. But problem is in left side numberplate light.
HEEEELLLLLLPPPPPPPP
Ronny
e270 cdi from 2003
 
When one of mine stopped working the bulb & fitting looked OK but the metal strip at the back of the light fitting had turned to dust, only visible by removing the whole fitting.

Russ
 
How can i remove this "thing"
I have tried and tried, but i cannot.
Should i open the silver thing?
Or do you have a video, or a PDF about it
Ronny
 
If it's anything like a w204, the silver bar across the outside of the boot above the NP lights has to be pried downwards and away, it's also an in-boot under the trim job too
 
Access to mine was inside boot too, after removing interior trim.

Russ
 
I tried, but i cannot "push it out"
I think i will strip, the carpet, and get acces that way or what?
 

Users who are viewing this thread

Back
Top Bottom