Parktronic W203 C180K

Discussion in 'Bodywork' started by rossmcd, Jul 27, 2011.

  1. rossmcd

    rossmcd New Member

    Messages:
    1
    Joined:
    Jul 27, 2011
    Car:
    C180k w203
    Hello from New Zealand
    I have a 2004 W203 C180K, this model has no parktronic. The bumber inserts look to be as per the Avantgarde model. Has anybody added parktronic to this model, is the wiring there? I presume that i will have to add the inserts, plug in and add the displays?
    Look forward to the guidance from a master.
    Cheers
    Ross
     
  2. CKLclive

    CKLclive Banned

    Messages:
    907
    Joined:
    Nov 5, 2008
    Car:
    CLK 430
    would cost an awful lot to do the bumpers should have the cutouts in the backs of them you only need to change the bumper inserts, plus the the front and rear
    wiring looms for the bumpers then connect from under the bonnet and in the boot area the plugs for them should be already fit to existing loom on the car but the sensors are expensive hear in the uk they are £55 + vat each, so the best bet if you
    can source these from a donor car

    Gud luck
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.