Retrofit W205 clock

[Benjam2n]

Hi everyone

I have retrofitted the wood ash trim and the clock but need to wire the clock in.
Does anyone have a detailed instruction manual or video which could help with getting access to the front SAM unit to retrofit the analogue clock to the centre console.
I have been advised that the bonnet release lever needs to be removed from the drivers footwell but I am having issues with this. Any advice would me much appreciated.

 

[Deleted member 149005]

Might it need a new loom and coding?

Retrofitting centre dashboard clock on R231 | Electronics and Audio

My SL is my forever car and to be fair comes with a great spec (airscarf, keyless entry, pan roof, electric wind deflector, upgraded alloys etc) But the tiny detail the original owner forgot to specify is the optional analogue clock on the centre of the dashboard. There are a couple...

forums.mbclub.co.uk

 

[Benjam2n]

Might it need a new loom and coding?

Retrofitting centre dashboard clock on R231 | Electronics and Audio

My SL is my forever car and to be fair comes with a great spec (airscarf, keyless entry, pan roof, electric wind deflector, upgraded alloys etc) But the tiny detail the original owner forgot to specify is the optional analogue clock on the centre of the dashboard. There are a couple...

forums.mbclub.co.uk

From other people who have achieved it, it sounds as though it does not need coding however does need the wiring put in place and connected to an earth and the SAM unit. However gaining access to the SAM unit seems to be challenging on my C205.

 

[Alfie]

The loom is not available as a separate orderable part. We can custom make one for you.
Email your vin to [email protected] for a quote. We would also give you the installation instructions.