• The Forums are now open to new registrations, adverts are also being de-tuned.

Steering Wherl Controls Not Working

Kal81

New Member
Joined
May 2, 2023
Messages
15
Location
Derby
Car
Mercedes A Class 3 dr Coupe 1.5 Avantgarde 2006 W169
Hi all. I’m a newbie to the forum. I’ve got a Mercedes A Class Auto 2006 3dr Avantgarde 1.5 petrol W169. It was sat for a while. Got it started again. Battery all good. Just had new brakes and full service. Drives ok but the indicators, horn and full beam don’t work. My mechanic can’t reset the service light either as the other steering controls don’t work. Indicators come on ok when the hazards are turn on, though. Strange.

Can anyone shed some light on this (pardon the pun lol). Could it be a problem with the control module? Any help would be greatly appreciated. Thanks.
 
A diagnostic on Star would be helpful in finding if a specific module is at fault. 👍
 
That would make sense as the airbag is only connected via the clock spring connector IIRC...he didnt say there WASNT an airbag light though 😝 worth a look anyway
 
Hi guys. Appreciate all the answers. No airbag warning light showing.
 
Could it be the relay module?
 
Have you checked this OP. I would also hazard a guess at this being the fault
Thank you. I’ll check that out. Could this still be the fault even if there is no airbag light on?
 
Or could it be the ignition relay?
 
I would suggest that you stop guessing (that's all we can really do) and get the car scanned (preferably with Star) to read the fault codes. 👍
 
I would suggest that you stop guessing (that's all we can really do) and get the car scanned (preferably with Star) to read the fault codes. 👍
I’m gonna get it looked at tomorrow by an auto electrician.
 

Users who are viewing this thread

Back
Top Bottom