Uneven rear inner tyre wear,which reasons??

[Mo-benz]

Hi all just need to of anybody who has experienced this , I used to run 255/30/19 tyres on rear axle but moved a notch up to 265/30/19 , not a great difference as the tyre still looks like it's the same size but Iv noticed on the rear tyres are starting to go on the inner sides of both, I don't know if it is the width that Iv added or camber needs to be done to accept the new geometry of the axle. Any ideas anyone please do let know..

 

[Lee C63]

It's normal for a C63 to wear the inside edge of the tyres.
If you check the fronts you will probably find they are the same too.

 

[wheels-inmotion]

Is the wear smooth?

 

[Mo-benz]

The wear is smooth, you have to look closely to tell but it is there , it shows significant wear.

 

[Mo-benz]

I kind of knew about the fronts , the fronts have not even shown any wear and I regularly depending how much uneven roads I go on I have the tracking on fronts checked most times but on the back it is the first time I noticed this unevenness. Could cambering the rear be done to near -0- camber balance?

 

[Mo-benz]

I forget to mention the tyres have not even managed 1200 miles I'd say. I drive car how it's meant to be driven but not lunatically, thanks

 

[wheels-inmotion]

Problem is the rear cambers not adjustable on your car.... You could off-set the wear a little by moving the adjustable toe more positive