DWhitelock
New Member
Hi Gaz,Hey V6nut glad you got it sorted ..
Any chance of some photos with the door card off love to see what's involved etc I looked but was afraid to take it off ... So Just in case I may need it if this fails ...
But in the meantime I was playing around and started to get the hover out to clean the passenger side door footwell.
Loads of saw dust as i'm still in build mode ...
So with the footwell exposed.... oh my word found the sweet spot for the reed switch and magnet and i'm pleased to say it works a bloody treat so without further ado here's the finished video contacts and door lock and alarm is working fine must admit I was getting annoyed with my self as it worked fine and with 3 attempts would it lock would it hell as like ... only to find out I left the bloody tail gate openso here's the video and I just broke into the wires on the passenger pillar connected into pins 2 & 5 soldered and taped over DOOR MAGNET position
I’ve been trying to sort my doors for ages and this seems like a good method.
2 things,
1) Which 2 wires did you use from the reed switch and to what No. wire 2/5
2) has this been a permanent fix.
Thanks
