w210 rear bushes

[billymclean]

hi guys, how difficult is it to remove and fit new rear bushes on a w210 and would i need any specialist tools. your help while be much appreciated.

 

[monte man]

Which bushes?rear subframe?the subframe will have to be dropped down,the bushes can be pressed out and in.

 

[monte man]

If its the multi link arms,its easier to replace the arms than the bushes.

 

[BlackC55]

The rear subframe bushes don't need to be pressed in. Just some light elbow grease needed. No need to drop subframe comletely either.

 

[shorty]

When I replaced the rear bushings in my 210 , i removed the rear hubs and pressed them out with a 50 tonne press . There is a tool for removing the lower hub bushings , bit as i didnt have this i just removed the hubs . It took abouth 3 hours to do the job .