GSMGuy
Active Member
Do I check the PAS Fluid Level for the steering on my 2002 ML270Cdi--- As usual the handbook mentions nothing other than - go to your stealer and pay him lots...
Erm no thanks...
Mike
Erm no thanks...
Mike
Where or How??
- Thread starter GSMGuy
- Start date
guydewdney
MB Enthusiast
there should be a fairly obvious 'pot' anout the size of a tin of beans, with a cap... open cap, should have very short dipstick on it with usual markings (hi/lo hot cold)
pot should have largeish thick rubber pipes (3/4" ish diameter) going to it. At front of engine, with or very very close to the PAS pump.
pot should have largeish thick rubber pipes (3/4" ish diameter) going to it. At front of engine, with or very very close to the PAS pump.
GSMGuy
Active Member
Nope can't see it - looks like I'll have to rake some covers off..
Mike
Mike
GSMGuy
Active Member
Found it....
Here...
Level is fne, so noisy pump is off with the rest of the car to the selling dealers on Mon..
Mike
Here...
Level is fne, so noisy pump is off with the rest of the car to the selling dealers on Mon..
Mike
Dieselman
Banned
- Joined
- Jul 13, 2003
- Messages
- 34,198
- Car
- Peugeot 403 Convertible
Have them check the injectors as well, it looks like you may have some blow by on No.1 injector.
GSMGuy
Active Member
I noticed that... And strangely enough on last years service report from MB a slight oil leak on No 1 was pointed out as needing attention..
Mike
Mike
