Recently picked up a clk 200 A208 which was fine on the way home but next day will not start. The engine cranks and fires once then dies as in it just cranks with no further ignition.
So far I have replaced
Throttle position sensor as it flung a code.
2 coil packs as they weren't in the...
Hi there....
I have used this forum for several years now but never registered 'til this year and only recently posted.
I have owned my CLK 200 Cabriolet KOMP for about 11 years now and it was about 4 years old when bought. The 46k miles has now risen to 76k miles...so as you can see that...
I have an SLK 200 and water is accumulating behind the fuel filler cap cover. There appears to be a drain hole through a rubber grommet which I have tried poking an electricians fish wire down but without success. Has anyone had this problem and if so do you have any suggestions for clearing...
Hi,
Does anyone know where the Knocking Sensor/s are located on the M271 Kompressor engine? I'm getting a 0V for the knocking sensor reading on the iCarsoft reader.
Just bought a Merc. SLK 200 compressor 2007, 184hp. The front brake pads are well worn and the disc vents are badly clogged up. Discs should be O K but the pads need to be replaced, any recommendations welcome. ,
hi all i need some front end parts for my clc but finding it very hard to locate,
Im wondering if anyone knows if they are interchangable from other models such as pre facelift c class coupe or anyother models:
Slam panel
Bumper
Headlight
Bonnet
Bumper reinforcer
Also will the rad...
I have a Mercedes clk 200 year 2000
I have a problem with automatic box sticking in gear also when I activate kickdown it sticks in first gear.
I have had the oil and filter changed today but problem still there.
Any ideas what problem could be ?
Also if gearbox problem would it show up...
Hi,
I have recently bought a larger crankshaft pulley, and i want to know if there is any problem using it without a new soft/powerbox. I heard that if there is too much air, some engine parts could overheat/melt. AND i don't want to risk that!
Engine M111.956 200k 163hp.
Pulley 193 mm ->...
Hi,
I have recently bought a larger crankshaft pulley, and i want to know if there is any problem using it without a new soft/powerbox. I heard that if there is too much air, some engine parts could overheat/melt. AND i don't want to risk that!
Engine M111.956 200k 163hp.
Pulley 193 mm -> 220 mm
Looking at a late 2012 slk200 amg sport for the wife in the morning,1 owner full mb history and 36 k miles,anything specific to look for/any known faults/weak points ,grateful for any help!
I have been having trouble with the main fuse box located in the dashboard.
The A/C fan has an intermittent issue with no power to the whole unit, on reseating the 15A fuse power was restored, however the issue returned after a few days and this process repeated.
I have obviously tried...
Front discs and pads are due to be replaced soon, I believe I have the AMG sports package brake set up
What brand do you guys recommend? ATE, Pagid, Bosch, Brembo, EBC etc
Cheers
Hi everyone,
I am in the process of stripping down and rebuilding the engine on my 1983 Euro W123 200.
The car is fitted with the M102.920 2.0 Carburetor engine. When I bought the car, it had no engine, I have since sourced one and I am slowly stripping it down and rebuilding it ready to...
Hi all !
I hope you dont mind me joining the forum as Im considering buying a Mercedes CLK 200 from Japan. ( I am based in Botswana)
Currently driving a VW GTI.
The car has 53K in the clock and both keys.
I would like to know the following if anybody could assist:
1.) Im guessing the 60K...
Mercedes 200 stacked headlight For Sale (1972) on Car And Classic UK [C685735]
Looks like it needs some work. But it is a right hand drive car with AC, which is v. rare.
If it were a diesel, I'd probably invest in it.
First, thanks for having me on your forum. I'm a Yank, working in Sicily, Italy, driving a MB! (Go figure!) I've already got the head removed without issue. I found the head gasket leaking at the back of the head, no codes, no water in the oil and no signs of steam/water in the exhaust. The...