bolt

  1. N

    Wheel Bolt Size

    I am looking for new wheels for my car (02 W168) and all the specs checkout except the bolt size. My car is 12mm and the wheels are 14mm. Local tyre dealer states the shank should account for the difference but will not say it is safe to use 14mm wheels. I am sure no one would be willing to say...
  2. E

    wheel bolt length to fit AMG wheels on my w210?

    I just got a set of 17" AMG wheels to fit my W210 E220 cdi but the existing bolts are too short. I have measured the bolts on the new wheels and they are 40mm long , i think i might need 60mm bolts for a proper fit, will i be right? Where can i get them cheap?
  3. S

    Injector bolt threaded

    Hi can anybody help with a threaded injector bolt ? Can I just cut and put new bolt or do I have to drill out and helicoil or can I get oversize bolt ? Thank you
  4. F

    lug bolt guide

    Hi all, On my W140 there used to be a thing in the toolkit to help mounting wheels on the hub - it was a silver guide that screwed into the hub so you could line the wheel up easily. Trying to find the equiv on the w163 toolkit and cant find out - should there be one? Anyone got a part...
  5. JcMercZ

    Bolt lengths w124

    Can someone advise what length longer bolts are required to bolt genuine 18 monoblocks to W124 estate, and are the rears going to be shorter ones that are needed?
  6. T

    Disc Retaining Bolt Sheared - help!

    It should have been a routine job Discs and pads done it on the 220 the 240 but not the W210 Passenger side all done EBC greens fitted all back together, now onto the drivers side repeat of the process undo the disc retaining bolt ooh that did not need much pressure on the allen key and the...
  7. SL350_SWINDON

    Fitting caster bolt

    Hi guys, just had 4 wheel alignment done and all within mb spec now. I do have pulling issue to left though, I understand that this is because my caster figures are staggered the wrong way wrong. I have bought the caster bolt so was going to fit. Is this as simple a job as it seems?
  8. S

    Wheel bolt cross threaded

    Hi all while being ripped off for oil, coolant, tracking, tyres, balancing and camber adjustment at my local friendly shop i have just been informed that one of the bolts on the rear wheel on my sl500 is seized and can not be removed. They do not want to put too much pressure on it so the...
  9. C

    W124 Wheel Bolt Assistance Requested

    My 94 124 E280 Estate was delivered last night, and after fuelling, washing and generally playing with it, I decided to get the winter steels it's wearing replaced by the 15-hole alloys in the boot. However, the nice chaps at the tyre place told me that I need different wheel bolts. Sure...
  10. E270 Owner

    CDI injector bolt repair Time Sert

    Hi Please note that the following information is one of a preferred methods of repair that I think the home mechanic should be able to apply him/her self to do. It is by no means a step by step info/pictorial guide but a competent enthusiast should be able to complete a repair to a high...
  11. Marcel-Anthony

    2004 CLK Rear Number Plate Bolt Size

    Hi Guys, I need to replace the bolts in my rear number plate. The ones that are in it are screws and don't fit the pre drilled holes and the plate is flapping around. Can any one tell me the right size bolt to buy. Thanks Marcel-Anthony
  12. A

    Bolt found under E250cdi 2011

    Hi, I was wondering whether anyone could identify where the bolt (pictured) might have come from? I have looked everywhere I can think of. Thanks. Adrian
  13. N

    Lug Bolt Question

    I currently have 17" Lorinser Wheels on my 91 500SL. It's time for some new shoes. I want to go with 18" AMG staggered wheels. 8.5 front 9.5 rear. Do they use the same bolts (I believe stock) that the Lorinser's use? Or do I need new bolts? Here is a picture of it now.
  14. F

    C63 head bolt issue

    Does anyone know if the C63 performance plus version suffers from the head bolt problem?
  15. mars1960

    Wheel bolt size.

    Long story short. Bought H&R 30mm rear and 20mm front spacers, track is now slightly to wide, these spacers came with bolts to bolt direct to hub and then use existing bolts to bolt the wheels to the spacer. Now i'm putting the 20mm on the rear and bought 12mm for front but anything under 20mm...
  16. D

    snapped injector bolt

    hi can anyone help ive snapped the injector bolt in the hole trying to tighten it because my injector was blowing now i dont no what to do
  17. M

    w124 sls sphere banjo bolt

    Does anybody know size allen socket I'd need for the banjo bolts on the bottom of the SLS spheres on an s124? I just watched a video on youtube that indicates its 13mm. Thought I'd check as that is about the only size I don't have in any of my socket sets.
  18. KillerHERTZ

    Wheel Bolt Size

    Anyone know the dimensions/diameter of my current standard factory fit bolts? I have the AMG suspension option with the 18" Staggered style IIIs.
  19. T

    W 210 diesel pump cam arresting bolt

    I'm replacing my diesel pump on my 1997 E300 Turbo Diesel and need a tool to secure the cam timing on the pump before removing the old pump. Please could anyone suggest where I can get this tool/bolt? Thanks.
  20. D

    18" AMG Mono Block II Wheel Bolt Size ?

    So... some bright lads tried to nick my wheels and seemed to have failed at the point of the locking nuts. No one heard the alarm go off so I suspect they hadn't got to he point of jacking the car up.They decided to take the standard bolts with them leaving each of the 2 locking nuts I have on...
Back
Top Bottom