error

Hi Does anyone have a link for a supplier of canbus error free H6w LED/Cree lamps. Bought a set of "Canbus Error Free" items which were nice and bright, but promptly threw a code, :fail. so returned them. Don't want 8000k 'blue' lamps, just a bright white 4k? Thanks

Hi Folks, Well I've got the dreaded Start Error, I've tried most things like checking the connections to the ECU and WSP all seems fine. I am at the point of sending off the ECU to have the immobiliser removed, and was just wondering if anyone had done this, and if they had can they...

Can anybody help please, I keep getting Script Error box on my laptop screen , running Windows 10 with IE 11, have googled the problem and have gone into internet options and ticked both disable script boxes but the problem persists. Thanks in advance :thumb: The above happens when browsing...

Hi all, New to the forum :bannana:! I have an error on the computer left and right side lights out. But they are both working. Are there 2 bulbs in the sidelights or am I missing something?

Yesterday, a warning came on: "Left Cornering Light" with a graphic of a bulb. Got home and took it out for a drive and the warning message was gone. I checked under Messages and it was gone there too (I think I may have acknowledged it when I first saw it, so that may explain why its now...

Hi everyone, I've taken the plunge and bought a 2000 SLK 230. It had a gear box problem, so I bought a replacement box and had it fitted. The car run really well for a day and now seems stuck in reverse. As such it won't start, I assume because the car thinks it's in gear. The display show a...

I just serviced my car and changed spark plug, but there was problem with coil and connection on to wrong plug as i have sorted it out there is a error that shows now crankshaft position sensor A circuit. And car something doesnt start but after few min it starts. Please help, i have CLK240...

My car 2007 GL320CDI I just replaced my ac compressor, expansion valve and the receiver/drier due to not cooling low pressure was at 60-70 psi and high pressure was at about 125. The new compressor is SSB (chinese version of Sanden/Behr C011280C, Perfect fit) All is connected and charged...

Hi everyone i am new to the forum, just bought a 2003 mint s class 320 petrol lwb, and am sold on how great mercedes really are. Had an issue display defective comes on screen and visit workshop/lighnting flash sign... Head lights flash, relays click all electrics go crazy and parking light...

Hello all. I'm trying to help a neighbour solve a problem on his 2011 E350 saloon with factory fitted sat nav. Since a few weeks ago it no longer places the car on the right point on the map; it's some 50 or 60 miles out. In the nav system's position screen the system appears to show no...

Hi All I've bought some AMG 6 spoke alloys and I've had them Diamond Cut and they look great, One problem they are all 8.5j and the front should be 7.5j. Any ideas ? They are to be fitted to my SLK 171 200 Kompressor 07 Plate The tyre sizes match what is already on the car ? Could I use a spacer...

Hi guys, I have a 2000 SL280 R129, I left it running on the drive the other day (it's off the road so I do this once a week), I forgot to shut it down and since there was only a small amount of fuel it ran out and sat with the ignition in the 'ON' position from then on. When I found it the...

Hi anyone had that problem ? Is disappearing after restarting engine coming time to time only stored code.car is lowering and dropping without any effort...

Hi, wonder if anyone can help. My 54 C220Cdi showed the following error whilst driving a 600 mile round trip. 'Exchange filter service next 30 miles'. I have looked but can't find a solution, car didn't go into limp mode either. Any help would be appreciated. Thank you.

dear members can any one help i am after error codes manual for sl500 r129 on 1990 i am trying to find what these error codes are for socket 7 come up at (3) socket 8 come up at (17) socket 10 come up at (20) (27) (29) socket 11 come up at (14) can any one help please thank you for your time...

Hi I have just bought a CL500 - 2003. It has the large screen in the centre console. When i press the 'Tell' Button i receive the following message. Tell Error No Phone. I have looked in the glove compartment and there is no phone or phone cradle. What are the steps for me to get my phone...

Every 2/3 weeks when I start my 2011 B180 cdi car I get an engine warning lamp come on. It gives a p0408 error which resets and the car is fine for another 2/3 weeks. This has happened about 10/15 miles after a motorway run so it is not driving condition induced. Any ideas or do I have little to...

Hello all, Have never posted on a forum before, however I have a CLK200 with the 1.8 M271 engine. When driving one day in traffic I noticed a shaking of my engine, almost like it was missing, after a short while it would continue to do this more frequently and the EML light came on. Showing...

hi all, i hope ye can help me with my problem, when i turn the key in my 2005 ml nothing happens, it wont start or crank the engine and start error just coming up on the clock. i got the key checked by a key company and they said the key was transmitting a signal. I then got the ml plugged...

Hello, I replace both front suspension legs and problem is now back axe show diffrent speed like front axe. I have error code P549E from Delphi diagnostic software. Is any chanse calibrate it? Here is a link with results from delphi scan maybe anybody have idea what is wrong with my car...