hoses

  1. W

    Parts for sale - W124 ARB bushes, brake hoses, Xenon warning stickers, 190E bits etc

    Hi Gang, Having a clear out last weekend I found a few new spares that I'd forgotten about that I bought for my 300TE which I sold last year. 1x set of new genuine MB front anti roll bar bushes - inner and outer. Part numbers: A124 323 45 85 x2 A124 323 50 85 x2 A common wear...
  2. E

    W203. Help me stop my washer hoses blowing off!!

    Hmm. Ever since I've had my W203 estate, one by one, each junction in the rear washer system has spat its hose off at some stage. Initially it was at the bulkhead, behind the battery. Then at the joinder behind the cubby hole in the boot. Then at the wiper motor. Earlier in the week, the...
  3. J

    w210 E320 cdi Turbo hoses

    The ones after the turbo to the intercooler....
  4. BlackC55

    PCS is now an agent for BMC air filters and Goodridge stainless steel brake hoses

    Hi all. I am now an agent for BMC air filters and Goodridge stainless steel brake hoses. I was approached by them and after seeing and trying both of their products I am happy to say the quality is excellent. Frequently asked questions | AIR FILTERS BMC | AIR FILTER | CAR | MOTORCYCLE |...
  5. J

    KME DIEGO G3, LPG Install.. Heater Hoses, question.

    On my previous cars. The heater hoses have ran through the bulkhead from the thermostat, then exited in the same place from a pipe underneath. I've tee'd into both the feed and return and never had any issues with overheating or the vapouriser not getting enough heating etc. The Mercedes...
  6. N

    W124 Coolant Hoses

    I've just picked up an E320 (200k miles) and want to do a once round of the age related things. Most of them I'm ok with (fluids, front wheel bearings, bushes etc) but I also want to change all the coolant hoses as they look and feel a bit sad. I've looked at all the part suppliers I can find...
  7. C240AUTO

    Earth strap and Auto box corroded hoses

    Hi guys, The car has ran over 600miles at weekend alone and done great, but my abs light came on (another post....dealing with it) but the car clunks when going from park into drive when on my sloped drive way, never on flat ground. So I thought id investigate and the pipes from the auto box...
  8. T

    Splitting boost hoses ?

    :doh: Hmm, what a mission today. It seems that my CDI just loves to fall apart, I noticed a boost leak, well heard it actually, by the time I got home, got it on the ramps & then dropped the undertray, the boost hose from the Turbo to the IC has a 3" split just on the elbow. Merc love...
  9. JonathanC250

    C250 TD Injection hoses issue!

    Hello all, Ive noticed a smell of diesel recently when driving my car, which i thought could have been where i spilt some when i replaced the filters the other week, but a couple of days ago i stopped at some traffic lights at night and i could see clouds of smoke coming through the grill...
  10. P

    2001 s320 w220 REAR BRAKE HOSES

    Hi, MOT time and glad to say a pass but advisory was rear brake hoses perishing, i am in the process of ordering them and wanted info about upgrading my brake fluid to silicone 5.5 brake fluid will it do any harm to abs system ?????:dk:
  11. Gridlock

    Braided hoses and other upgrades

    Popped the C43 down to Olly at the weekend for a checkup and a couple of bits, a) Really good to see his C43, I think that was something like 1% of RHD saloons together in one place :D Always good to see one in better nick than your own, provides both motivation and ideas.. b) When I...
  12. S

    Worn Breather hoses w203 ?

    :wallbash: I have been advised that the random misfire and hunting is due to worn breather hoses on my C180K. Dealers want a small fortune to replace both hoses which only cost £16(parts only). I know these hoses are situated under air box, however after taking the six screws off air box cover...
  13. pupsi

    W124 E500/M119 engine air intake hoses

    I want to change the air intake hoses in the engine bay. The original ones are made of a degradable material and as such are wasting away. The ones used on the R129 SL however were plastic, and also the 5.0 M119 engine was used in the 500. Will the 129 hoses fit on my car? 124 Part No. -...
  14. bennesspipers

    rad hoses, where from ?

    I need the short hose from water pump to stat housing for my C220, where from other than stealer ? :wallbash:
  15. japimport

    coolant hoses

    i was havin a nosey in my engine bay checking fluids etc and i noticed my top radiator hose was hard with pressure is this ok or is it problems ahead
  16. R

    Silicon intercooler hoses

    I've seen the various boy-racer cars with the fancy blue silicon hoses for their intercoolers and turbos. What I want to know is whether I'd see any improvement in my 2002 SLK230K by fitting them. The existing pipe are a little tatty and will probably benefit from a good cleanout inside, but I...
  17. BlackC55

    Braided stainless steel brake hoses for the 202

    I have just had made, some braided brake hoses for my 202. They are made by Goodridge and of the highest quality. They used to do them for the 202 but there was some problem with them so they stopped production. I can now offer them via PCS either supplied or supplied and fitted. The kit is...
  18. 1

    C270cdi common rail plastic hoses leakage

    as per title, mine is a 03 car and as read sometimes on this forum it's quite common a bad tightness of the diesel hoses in way of the diesel filter and/or HP pump in front of the common rail, just over the service belts. said that, I've noted an oily dirt in way of the HP pump and hoses, in...
  19. G

    190e 2.5 16v breather hoses

    Can any one advise me where the engine breather hoses are, (or better still attach a diagram) on a 1990 190e 2.5 16v.At the minute the engine has a bit back pressure, compression readings are 3 x 200psi & 1 @ 190psi and uses about 1 litre of oil per 3000 mile so engine wear doesn't seem to be...
  20. T

    Coolant hoses.

    Does anybody know which coolant hoses would be best to tee in a heat exchanger for heating veg oil. I'm probably looking at getting the hottest water so maybe the ones to the heater matrix would be best. Am i right in thinking the pipes leading to the solenoid valves are the ones to go for? Car...
Back
Top Bottom