lower

All Trying to source an offside lower wishbone for a 1986 500 SL. Car is off the road, and Mercedes have just quit making the part, so the pattern parts makers aren't up to speed yet. Car is not driveable. Anyone know of someone breaking or a dedicated breakers yard I could try ?

Hi Recently bought a set of eibach lowering springs and koni yellow sports to lower my clk55 w208 model. Just wondering if the front and back should be on level or the front should be lower then the back. Appearence wise I preffer if the front and the back on the same level but what the right...

On my W211 E270 7 months ago I changed both front lower pivots ..lemforder ... and now when I performed the winter checking I was told that one of them has a little crack. Do you think it will pass me trough winter? < Sent from my Samsung S5 Mini using MBClub UK

hello wise ones, I've been thinking about getting Eibach Pro-Kit lowering springs (Front (Approx.): 40-45 mm Lowering Rear (Approx.): 30-35 mm for my 1984 380SEL. I just wanted to know if anything must be taken into consideration when fitting lowering springs to a car...

M not very mechanically minded so any help,with this would be awesome. When I'm reversing to the right on full lock there's a physical knocking noise at a certain point of the wheel turn also at low speed there is a slight knock on the left hand side what could it be the cars a 2010 c63 with 27k...

Hi all i am looking at lowering my Vito 113CDI 2012 can anyone suggest a good garage in Teesside and springs

Got to try lubricating the rear hub lower bush tomorrow anyone done this and how did it go Cheers

Hi All now that I have finally sorted my hard start issue on my 2001 S320cdi I would like to move onto sorting the suspension issues the car has. I intend to change the lower arms on the front suspension, the lower ball joints on the hub carrier that attach to the other arm and both track...

Hi guys Strugling to separate the lower ball joint from the lower arm on my w211 Tried everything looks like seized very badly broke one ball joint separator today Sprayed wd40 and left it for a night hope will work it tomorrow If not is it ok to heat it up and try to separate it? Thanks

Just noticed the above has some shiny grease leaked out of the bottom rubber gaitor - it does not seem to be split, but didn't look to be sitting correctly at the bottom so I slid it over a round metal piece at the bottom and will monitor. It does not fit tightly at the bottom so wondered if...

Where to purchase h and r springs from also anybody know of any other springs as don't want to swap to coil overs thanks

So I've started to notice that this trim, which is in between the rear exhausts and low down on the rear bumper (where the rear diffuser would go if I had one), has become more and more light grey. If I look in early photos, it looks grey but on closer inspection, it looks black. Is this...

Hi all... I need to replace my Upper and Lower front wish one arms in my 2005 W203 C220 CDI.... It's the Sports Edition model with the AMG alloys and body kit. Will the standard wishbone arms fit or will it need a different type...? Thanks

Is there any way of replacing the lower mesh grill without having to take the front bumper off? Has anybody done this? Mines got a big hole due to a pheasant!

Noticed a few cars for sale have an ///AMG badge on the bottom lip of the front bumper. Should all E55's have this? If not, any info, was it an option? Part number etc.? Thanks :thumb:

Anybody had any experience in replacing the lower front grille on a W207 coupe. Mines broken and I have bought a new one and need to change it. Looks like the whole sodding bumper may need to come off though !! Any suggestions or experience ??!:eek:

Hi, MERCEDES C CLASS W203 S203 2 UPPER LOWER WISHBONE TRACK CONTROL ARMS BALL JOINTS | eBay Anyone bought them on ebay ? What's the quality ? Any help appreciate :) I need to replace all front's one but on ECP 350 for all 4 :/

Hi all, I took my wheel off today to attempt to change the lower arm on my suspension. And I noticed to take the side attached to the hub/steering knuckle off I need to unattach the suspension strut off the hub, via the two bolts at the back? Haynes mention to open the stut to steering...

Does anyone know how much lower the pre-facelift sports pack is than standard? I'm looking at ordering springs but want to know how many millimetres to take off of the suggested drop :) I have a feeling it's 15mm, can anyone confirm this?

:thumb: I ordered from ECP the replacement S210 lower front wishbones last week and took delivery on Friday with a grand plan to get the car ready on Friday evening and get stuck in Saturday. I ordered Lemforder parts that are EXACTLY the same as the originals with the exception of a stamped...