pcd

I am selling my nearly new precision CNC machined 20mm Hubcentric wheel spacers with extended radius bolts. These are PCD 5x112, they have come off my W209 CLK55 AMG but may fit other models, please check to make sure. I am selling the alloy spacers with the correct extended RADIUS bolts so...

i have a 2000 plate clk 320 with amg 17" wheels. Was wondering what pcd the holes are and what offset they are. Thanks in advance

Would just like to say massive thanks to Andy for helping me to sort out the alternator problems and managing to fit me into his busy schedule to fit my alternator on a Saturday morning. Would highly recommend :thumb: PCD

Would just like to say massive thanks to Andy for helping me to sort out the alternator problems and managing to fit me into his busy schedule to fit my alternator on a Saturday morning. Would highly recommend :thumb: PCD

can somebody tell me what the front and rear PCD and offset is for the C32 AMG 2002 car Cheers

Nice alloys required I can collect im based in Birmingham

I need two trailer wheels or two tough steel wheels. PCD is MB-standard 112mm, originals are 5.5 x 14 but anything up to 6.5 x 14 would be OK. ET of the originals is 30 I would take a set of four if anyone has a set Or I would take two trailer wheels, with or without 185 R14 8-ply tyres...

Pair of Hubcentric 20mm wheel spacers 5 stud 5x112PCD 66.6 centre bore, Mercedes etc. Brand new and unused, bought these for my Mercedes CLS when I bought 20 inch wheels for it, but never got round to putting them on then sold the car. So these have been sat in the garage since. £60 + P&P...

probably a stupid question,,,but is the pcd the same on all mercs? i.e. will w204 fit w203 or w124? thanx:wallbash:

Hi I am a new member and have never posted before so if I am doing this wrong sorry I would like to know what the pcd is on my 307d motorhome so I could change the steel wheels for alloys and poss change the rolling circumference so could gear it up a bit -very slow top speed 56 mph would like...

As title, I am not sure the wheels are genuines but they are 5 studs , 16" and said PCD 112? Is that the centre / hub? Would that fit an E300TD? Cheers. Olivier

hi all,i have a 1989 190e and i know that pcd are 5x112 i've checked so many site with there charts but i just sold my dotx zinc 18" muti stud as they wanted to fit the the a vito but they dont fit????im puzzled how come the fitted on my 190e but dont fit vito???? vito have the same pcd:doh...

Please can someone tell me what the CLS stud pattern is.? is it 5*112 ? Many kind regards

W124 E300D (1994) Are PCD codes the same on all E Classes.....am hoping to upgrade to alloys from steel wheels.

Does anybody have anything like this hanging around? 112 PCD is the same as merc, steel or alloy doesnt matter, girlies wheels leak so much as they are knackered cheap alloys that were on the car when we brought it, thanks,

Good morning everyone :) I have narrowed my search for new wheels down to two sets. My question is what tyres should I have fitted to 8.5JX18" ET35 PCD 5X112 alloys and will they fit my W203 facelift? I had a look around and it seems 225 40 18 seems to be a very common size but I don't...

Hi All, I need to have the wheels on our car refurbished. However, to do this properly I need to remove the wheels and send them away for a few days but we still need to use the car. We have been offered a set of new shape (W211) wheels to borrow but I need to know if they will fit our late...

as posted earlier and most of you may have read i bought some alloys costing me quite a fair wack of money but to my dissapointment they dont fit. their PCD is 114.3 whereas the PCD of the hubs on my W202 is 112mm has anybody got any idea where i can purchase a complete set of hubs (second...