pressure

My car has had a scan and the mysterious Boost Pressure Regulator Fault has re-appeared. This interlinks with sharp rev changes at higher revs (not gear changes) and most recently limp home. I'm thinking that variable vanes on Turbo or the actuator are seizing? 1. Am I likely to be...

Hi. I have a 2001 Merc Vito 110 CDI which keeps going into idle mode when I get into 4th gear. It just revs to 3000 then doesn't give anymore power. I have changed 2 of the 3 boost pressure sensors ( one at the top of the engine and one underneath. The last one is at the wheel arch from what...

I am having a clear out, so here are another things i have no use to: Used 4x Mercedes Tyre pressure sensors Details are: BERU 000 822 33 06 4Nm 20 8069097 11 433Mhz BERU A 000 822 33 06 4Nm 20 0010559465 11 433Mhz BERU A 000 822 33 06 4Nm 20 8540983 11 433Mhz BERU A 000 822 33 06 4Nm 20...

hi there just wondering weather a manual boost controller will work on a 2003 c270 cdi and also where can i fit a boost gauge hope you guys can help many thanks

DPFE (differential pressure feedback EGR) sensor is it prone to die? my W203 C220 CDI is starting to act up entering limp mode due to a P0401 code... valve working correctly but DTC cores keeps coming back to pending codes... is the DPFE sensor expensive? where is it located? is it a...

Hi, I know it's not a lot to go on, but does anybody think that the oil pressure on this car looks a bit suspect? The car is a 1992 SL500 with under 100,000mls.

Hi All, i have just bought a 2003 ML270 and the steering feels slightly vague, like the side wall is slightly flexing before any steering takes place rather than a mechanical feeling if that makes sense. I`m going to check the pressures as soon as i get a chance but in the meanwhile does...

Good evening.., Can someone please shed some light, i have a 2008 vito 120 cdi 3.0 v6. The engine managemnent light has come on and i have fault code P2078 which comes up pressure difference transducer??? Does anyone know the location of this part please?? Or anybody eles had this fault...

mercedes retail is around £500 for them. these guys with make them from new and offering them delivered for £160 with special mbclub price of course they can make all sorts for old or new mercs and other models the link for the high pressure pipe but he is doing the pair which is...

Hi My w124 e320 coupe is showing oil pressure gauze always at 3 even when idling. Is that ok? Sent from my iPhone using MBClub UK

Hi there i changed the engine on my 112cdi Vito and just need help with one problem ?? engine runs fine heaters work fan cuts in when should BUT. the coolant pipes seem to be rock solid and just want to know if this is normal there is no loss of coolant. if i put overflow pipe in a bottle...

Good Day. i recently got a mercedes 260e 1988 w124 little over 350k on the clock i started by giving the engine a service replacing all the fluids and filters but a few days ago the fuel pressure gauge just stopped working so i took out the oil pressure sensor and replaced it with an oem one...

I get a erratic idle when the car is stationary and sometimes the engine stalls. Today, I had the EML come on and I have had the code read as: P0745 - Pressure Control Solenoid “A” P0749 - Pressure Control Solenoid “A” Intermittent I had the code cleared but it has re-appeared after about...

Got the red dial warning earlier. Checked tyres one on the rear was low, maybe a slow puncture?? Pumped it up got back in and kept getting reset run flat indicator. Done a search ( can't get to owners manual ) what I found. Scroll to service in cluster and it's in there. Not on mine! I've only...

Pressure difference is to small,please somebody help what does it mean. Mercedes said that i should change turbo charger into my cls 320 cdi

Hi, My AC has stopped working. I've checked pressure and there's loads. So I'm assuming the AC pressure sensor is faulty, or the connection to it is faulty, so I'm hoping it can be a DIY fix. I've looked at the AC lines that are clearly visible, but I can't see any sensor on there...

Good deal and washer? Looks good to me. http://www.amazon.co.uk/gp/product/B00AZKE2HC/?tag=amazon0e9db-21

Hello good people of MBClub I need help replacing my 'Fuel Tank Pressure Sensor' in my 03 C240 BASE. Is the sensor located under the rear seat? Is it on top do I need to depressurize and pull the whole assembly? Any help would be much appreciated.

Hi there im new to the Forum and looking for a Bit of help As above I have a 2000 Sprinter 313cdi It will Start Run for 2 seconds then cut out Code coming up as rail pressure monitoring Maximum pressure Exceeded .I have checked o rings on solenoid on rail And replaced filter. The EDC...

Hi folks, My car is showing an error code of P3002 which I understand is caused by a faulty Differential Pressure Sensor. Can someone give me a head start on where to find this part on my car? It’s and S320 OM642 320CDI V6 engine. Thanks.