pulley

Hi, Just swapped out my 84mm pulley and fitted the 77mm pulley with a re-flash from Eurocharged. There is a noticeable difference, the torque kicks in much earlier giving progressive acceleration without too much effort. Sometimes it's nice to put the car in comfort mode for the low rev pull...

https://www.gumtree.com/p/car-tuning-styling/eaton-m62-mercedes-supercharger-pulley-upgrade-w202-clk-c-class-c230-c200-/1150323536 Discuss :)

I am not sure if it was covered before, but I couldn't fine it. So I am thinking of buying one of these pulleys and tune the car. The first question is do I need to change the spark plugs with colder ones or the original ones which I changed before 1000km will do the trick? Second and maybe...

self explanatory, looking to find the v belt pulley for the water pump and viscous fan of an M114 250 engine.

CLS 55 AMG we had in last week with us here @ MSL Performance!!! In for a Remap Eurocharged Remap and a 84mm Supercharger Pulley. Tuned Figures: 553.46 Bhp 665.08 Ft Lbs Torque [/URL][/IMG]

Hi Guys, Getting a 77mm pulley sorted for my car, does anyone want my 6 month old 83mm pulley? My car gained approx 30bhp and plenty of torque with it and the EC remap. It was fitted at MSL, has the Nachi bearing. You can fit it yourself easily (YouTube tutorials) and remap it with...

Hi Guys, I'm trying to get hold of a 77mm UPD clutched pulley. I've got the engine bay cooling tank sorted so I want to crack on with this and get it done. This will be for the DIY'ers like myself using the Eurocharged or any equivalent remap cable. I live in Cornwall 300 miles away from...

Whilst in the middle of my head gasket change ive noticed the supercharger bearing is a little rumbly. I know the bearings are easy enough to change and relatively cheap, But was looking at a clutchless pulley from "fabtech" being a little smaller at 82mm also boosts upto 12.5-13psi. Is it a...

Can see a slight weep around the air con pump pulley. Would that mean changing the pump ? C220 cdi 2005 w203.

hi guys, I have installed a 65mm s/c pulley onto my c32 amg. the car has no other mods apart from kn filters, is it safe to run the car for the time being without a remap until I get time to get it done? in terms of detonation, etc? any help is appreciated. apologies if this has been asked before

Hello, I have a w208 CLK 200 kompressor (2001) and I`ve found a kompressor tuning kit (from Speer Chiptuning) on ebay, which includes a pulley and a OBD chiptuning. They say I will get up to 206 PS and 300 Nm. I want to know if anyone tried it, and if it`s good/bad. Thanks! :confused:

Afternoon all, Hope you're enjoying the weather Wanted some advice..I've seen lots of old threads regarding the pulley upgrade dating back to 2005/2009. Its now 2015 and I just wanted to who is best priced/quality on the market to get my pulley upgrade done from. Currently my...

I ordered a steel 65mm pulley off IBF a Polish company a few days ago it arrived today. I looked for reviews on the company couldn't find and bad I found good reviews from there other pulleys. So I thought I would give it a go as I can't find no one who has used one on there 32k or crossfire...

Hi guys it's my first time on here so please excuse any mistakes I make. Wonder if any of you can shine some light on alittle problem I got. Basically the bearing on my tensioner pulley keeps failing after a few day's. My car is a 1997 c280 v6 sport. Being a toolmaker by trade I have replaced...

Was going to fit a 180mm crank pulley to my E55 but as I've decided to go a different (yet a lot more expensive route) I'll be selling the crank pulley, here's a pic: And this isn't a backhanded advert, it's just that I don't want to stick it for sale at a daft price and it not sell. I...

Hi guys hate to ask for assistance already but i need to get crank pulley changed over as the rubber on mine has started to protrude slightly. I bought the part (330 quid!), but don't really want to mess about fitting it myself as i don't have the crank pulley holding tool. Can anyone recommend...

Hi, If anyone on the look out for a Eurocharged Pulley I have one as have just put mine back to Stock to sell. Its in good condition and car has only done about 5k since Acid at MSL fitted it. Open to Offers Also I have a pair if SL55AMG air intake boxes complete, however these have been...

Hi I am looking for a crank shaft pulley for a W211 E55 amg (2003+). Original Mercedes part with no damage, anyone who has upgraded their pulley might have the original laying around. Ideally around the London area but can travel. Part number: A1130350200

I'll be selling on my C32 AMG soon and was wondering whether there is any interest out there in the 65mm pulley and SL55 full air intakes I've installed on the car as it will more than likely go back to standard when it goes. Retail for the 55 intakes are around £350 and the Y pipe I have is the...

Hi do any of you guys know where i could purchase an alloy guide pulley or set for an 03 e55k and a price? Thank you benty