remove

The original "entrance panels" or kick plates on our W163 ML are OK but have picked up some marks over the years. I managed to procure a complete replacement set for all four doors at the right price, and they'll be delivered shortly. How are the originals are removed? A simple matter...

i have a blown number plate light , one of the screws just spins the other comes out ok but the one in the middle is a riviet by the look of it how the hell do i remove the plastic lip to access the bulbs ;( oh btw 1999 clk w208 ;) edit also i found that the arm at the front drivers wheel that...

Hi guys my passenger air vent is broken , any how's tos please on how to replace it ? 1999 clk ? Thanks

hi there guys, firstly i would like say im new to this forum i wish i found this forum earlier, as the titles says, i need to remove a front bumper from an A class w169 08 shape, and i need some advise on how to remove it, or perhaps a diagram of some sort will be fantastic, i would really...

Prior to removing the diff from a W201 2.6, I'm trying to remove the ABS sensor from the diff. I have the cable disconnected from where it enters the loom under the rear seat and pulled through the hole beneath the seat. I also have the screw removed from the clamp/plate that secures it to the...

Hi everybody, I've got a blocked washer jet on my 2001 SLK. I've tried clearing it with a sewing needle and also compressed air but with no luck. I'd like to remove the unit containing the 2 washer jets and leave it to soak overnight on the basis that it might be hard water causing the...

I am new here. This is my first post. Does anyone know how to remove the backcover of the driver seat? I am driving a E220 CDI 2009 model (W212 I believe). I pulled out the headrest and unplugged the wiring attached to the headrest. I now need to reconnect the wire to stop the dashboard...

found this link how to remove instrument cluster ,can,t post on how to YouTube - ‪Instrument cluster removal - Mercedes‬‏

I need to remove and refit a steering wheel in my vito, it has multifunctions. I am changing the dash! so need all the help I can get.

Hi, Read many internet posts on the best way to remove baked on brake dust from alloy wheels. I have some 15 holes that have black baked on brake dust between the spokes - anyone managed to clean this off without damaging the wheel finish? Thanks toby

HOW TO: Remove & refit a (most likely rusty!) W202 Wing - Pre/Post facelift/C36/C43/C55 AMG Time taken: Under 30 mins Tools required:- 10mm* & 13mm Socket, Philips screwdriver (*10mm extremely narrow!), Large sheet or towel to lay the wing on once free of the car 1. Remove the side indicator...

Is it a door sill? Talking about the plastic cover in the picture here. How does it come off (without breaking it!) as it feels pretty snug.....

Could somebody please tell me how to remove the rear star on the boot. Do I need to go in through the boot? Isit a simple Philips screw driver job? - W208 CLK Thanks.

Any one had to remove the chrome trim from around the top of the windscreen on a SEC . Is it bonded in or will it clip off .Also is there a risk of damageing the wind screen .Picked up a stone chip on the front of the roof need it painted

I bought a new PC recently and I use Thunderbird for my email via Virgin. I have the Thunderbird account set up and working. It seems I also have a Googlemail account using the same log-in and mail server. There is a Googlemail tab in the T-bird main account inbox It is duplicating...

Hi, I am in the process of removing the gearbox from my 04 e320cdi. Now I have removed exhaust, prop all gearbox electrics, filler and cooler pipes, etc and starter motor. My question is how do you reach the bolts at the top of the gearbox? does the engine sump need removing in order to...

Planning a DIY wheel refurb and want to take the old tyres off the rims. Is it easy / possible? And the weights and valve? They won't be refitted as I'll get a garage to fit new ones when I've finished.

Hi, I bought my SL320 only 3 weeks ago, so this is my first post. Can anyone tell me where all of the fasteners are that hold the plastic under tray onto the car. The tray I want to remove is the one that sits beneath the front bumper. I can see some screws on the front of the tray, but...

Sold car and now have the dvd navigation unit with m.o.s.t.out of the car! Forgot to remove the disc! Need help in removing the disc ! Any help will be greatly appreciated!

the side body rubbing strips , how do i get them off , i need to tackle rust (theres a shock ;)) and its far easier to sand over area with it off. Also how do i remove the exterior door handles , is it a big job ? cheers