replace

Hi does anyone know the cost to replace both front ball joints on my w211 E320 cdi they have failed on its mot. Regards tomg

Traced the trans fluid leak on my C250 to the multi-plug. Box behaved normally despite having lost nearly a litre of fluid over the last 10k miles. Its been kinda oozing away. The fluid, filter and sump gasket were all done 10k miles ago, so I'm just doing the multi-plug and getting the fluid...

Hello experts, can you please help? My car (211 E320 Cdi 2005) has gone into Limp Home mode (limited power, max 3000rpm, no kickdown, max speed approx 50mph). From reading the many posts on this forum about these symptoms it appears the MAF sensor is most likely at fault (though it will...

I have searched through the forum and found posts for mirror / cover replacements, but none for the complete wing mirror. The other day a lorry took out my wing mirror, due to one way road I could not get back in time to get his details and now need to pay or claim on my insurance. Went to...

Hi All, I am playing with the idea to replace the bushes and joints on front whisbones. The problem is I have no idea wheter it is possible as a DIY. Further, I have no idea about the correct procedure. So, here is when you guys come into picture. I would like to ask help to set up a...

Hi I had a Porter Cable and used it to polish my cars and boat and loved it but........ somehow i have managed to misplace it whether it was stolen or whatever i dont know but its gone. So having been out of the detailing scene that changes so quickly what would the panel advise as a good...

How much is it to replace a C200 CDI coupe turbo? Pretty annoyed but even at £1000 repair its still £1000 cheaper than what I'd pay on the forecourt. But my fathers a good engineer and he could do it himself so I'm wondering A: where to get refurbed turbos? or should I buy new? B: How...

Hi, with help ive managed to diagnose the reason for my heating now working. Its the matrix that needs replacing. Does anybody have a tutorial with pics on how to remove the dash to gain access to the Heater matrix? Any help will be greatly appreciated. Many Thanks

My battery died again. So I ordered new one from MB. Was going to collect it but had to recharge the old one first.... After recharge I put it back, started the car and run it for 10 min to warm up the engine.. Then stopped and turned back in half an hour to drive for the battery.... Started...

hello, my w210 estate's driver side mirror has been knocked off by some idiot who did the same to 2 other cars parked nearby and neglected to leave any insurance details (there are 2 other side mirrors on the road and one passenger-side mirror, presumably belonging to the culprit!)...

Does anyone know how to replace the rear number plate bulbs on the C-Class estate (W204)? There are only two screws under the external chrome strip which do not seem to do anything. Searching the web find plenty of answers for the saloon which mentions removing fasteners and screws from the...

hi lads just to ask if anyone got any pics or instructions on how to replace blower on 190e non aircon ? plus got new rad from e-bay shop goes by the name of hook4929 based in surrey brand new rad £50.00 delivered ordered it on thursday got item on friday pm . regards billy lpool

I am thinking of buying an 04 e class which has phone prewire with a fixed cradle for the old Nokia 6310i I wondered if this could be changed to use the new style interchangable cradles

Hi all, Please could someone tell me how to take off the wing mirror housing of an E class W210 driver side? Bought a replacement mirror of ebay (not oem) to change the drivers side mirror glass.

Hi, I am driving a C200K mod 02. The engine is a 2.0lit M111, with the M45 supercharger. What I have done so far is pulley (+30bhp) , headers (+nothing, maybe lost some due to OEM exhaust and cats) and ic (+12bhp, due to 6deg more ignition advance and 10-15 lower IATS) In my garage I have a M62...

Step #1 Turn ignition to the "on" position to be able to...

Hi all doing a lot of asking here, but I do try to resolve it myself first, I want to replace the pea light in the light switch, mine is a W202 estate with hight adjustable wheel. I have taken out the three screws that are hidden under the handbrake release, but without damaging the facia I cant...

I have an 1989 300SL (W107) with a Hirschmann Auta 5090 power antenna. All the posts say the old mast just pops out and the new mast feeds in. But that isn't what happens. In fact, it looks wrong. When I loosen the top nut I can see the tube which extends from the motor, which has an external...

Tools required Screw driver, wrench with gauge 10 and 13 sockets. You are going to remove 10 nuts in total. Four of them are gauge 10. Six are gauge 13. All have metal washers. Time to remove 45 minutes. Time to refit 20 minutes.

THREAD UNDER CONSTRUCTION. Please do NOT add any posts to this thread until completed. Thank you.