• The Forums are now open to new registrations, adverts are also being de-tuned.

124 124 Wheel Alignment Question – Advice Please.

WDB124066

MB Enthusiast
Joined
Apr 17, 2009
Messages
6,170
Car
1996 E320 Sportline Cabriolet x 2
All things being equal would front toe alone have the ability to cause outer shoulder feathering on the front of a Sportline A124.

If all other parameters were set correctly would feathering on the outer edge tend to be the result of too much or too little toe....??
 
Thanks for that, the ride height is the same....
 
Hi W

when you mean feathering do you mean outer tyre wear?

Assuming so, i would probably say the toe could be causing the issue yes.

Maybe a worn ball joint? or something really simple as Tyre pressures?
 
Thanks Billy, yes outer tyre wear so the tread on the corners has a slight saw tooth feel when running your hand over the tread backwards. It is a sign of accelerated wear.

Ball joints are fine, tyre pressures are slightly high, 34 psi instead of MB's recommendation of 30 psi.
 

Users who are viewing this thread

Back
Top Bottom