Mattboocock
Member
Holy cow! Can you imagine?!I believe they are still in development of a Stage 2 800 Nm file .
Does stage 2 mean changing the Down pipe??
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Holy cow! Can you imagine?!I believe they are still in development of a Stage 2 800 Nm file .
Off MSL this morning. I asked if they still outsource the tuning:They don't actually do the tuning on dervs it's Big Fish Tuning !
Custom Tuning | Big Fish Garage | Stokesley
Big Fish Garage offer premium vehicle servicing and full custom tuning and servicing packages written for your vehicle, your driving style, and your modifications.www.bigfishtuning.co.uk
Not sure if it’s there own (the website does indicate this) or they just carry out the work in brum...Without casting aspersions on MSL in any way, does that actually mean that they only use maps that they have developed in-house, or that they now only remap cars at their Birmingham site?
Regarding dyno charts, I have the one for my E350 CDI - 322 hp and 719 nm. I see from my notes that GAD quoted a generic +30 bhp and +80 nm, 295 bhp and 700 nm, but I don't doubt that they, like MSL, quote the minimum they might achieve, and on my car would in practice have achieved much the same as MSL.
Those value sound about right to me from my experience. I had our ML remapped from BFT (same 350 engine as yours) end result of 303bhp. Compared to the stock quoted 265 bhp, so a 38bhp increase, BUT my car was already running at 273 bhp (IIRC) from factory, so my increase was less noticeable.Afternoon all,
apologies is already discussed on here...
i have a 2013 CLS 350 CDI. Can anyone recommend an ECU remap or chip tune etc ? Been quoted a 35bhp gain & 60nm torque. Does it Screw the ECU as the dealer warned me not to do such a thing as it screws them and you constantly have an engine management light on. And also invalidate the warranty! I have 3 mths left of the warranty!!
Cool. Thanks for that.. where are BFT based?Those value sound about right to me from my experience. I had our ML remapped from BFT (same 350 engine as yours) end result of 303bhp. Compared to the stock quoted 265 bhp, so a 38bhp increase, BUT my car was already running at 273 bhp (IIRC) from factory, so my increase was less noticeable.
I am yet to get the CLS (350 2012) done. I would definitely get it on the RR prior to the remap, so you can see what your cars actual output is oppose to the quoted 265bhp.
Would highly recommend BFT
Off MSL:Not sure if it’s there own (the website does indicate this) or they just carry out the work in brum...
ive contacted GAD yesterday but had no response yet. Take your point though on everyone under stating their figures.
Kind regards, Andrew Middleton Sales & Marketing | |
They are based in Stokesley, a beautiful part of the world....Cool. Thanks for that.. where are BFT based?
Abe. I also have a Ml350 which I am thinking of getting a stage 1 remap.Did you see any change at all in your ML,was there any improvement in MPG. I do a lot of towing with a twin axle van so was hoping it would improve the towing ability and fuel efficiency. Or in your opinion is it just not worth the money.Those value sound about right to me from my experience. I had our ML remapped from BFT (same 350 engine as yours) end result of 303bhp. Compared to the stock quoted 265 bhp, so a 38bhp increase, BUT my car was already running at 273 bhp (IIRC) from factory, so my increase was less noticeable.
I am yet to get the CLS (350 2012) done. I would definitely get it on the RR prior to the remap, so you can see what your cars actual output is oppose to the quoted 265bhp.
Would highly recommend BFT
Sorry I can't help you with respect to the difference when towing. I did see an improvement with both performance and a marginal increase in MPG. For me, it was definitely worth the money.Abe. I also have a Ml350 which I am thinking of getting a stage 1 remap.Did you see any change at all in your ML,was there any improvement in MPG. I do a lot of towing with a twin axle van so was hoping it would improve the towing ability and fuel efficiency. Or in your opinion is it just not worth the money.
Sorry again for the delay, just hadn't been on here for a while. As you are very local, you are more than welcome to meet up and try our ML out and see the difference for yourself.Thanks for the reply.I’m booked in with Dynoremaps at Middlesbrough (was Stockton).
We use essential cookies to make this site work, and optional cookies to enhance your experience.