• The Forums are now open to new registrations, adverts are also being de-tuned.

ml 230 will start and drive but then will not

shane ml320

New Member
Joined
Oct 17, 2013
Messages
10
Car
ml320 2000 plate
hi guys i have a ml 320 it was great ,i have had it for three weeks all ways what one this is my first one. but some times i can go out to the car and it starts drives but the next day the car will turn over but will not start for love or money the battery will go flat before she will start but ones it start it will start all day no matter how long i leave the car , plz can some one just point me in the right way so i can get my car going again . thanks for you time for reading and i look forward for any replys and help shane
 
hi guys my ml 320 will not start be for i empty my bank is it opposable it could be the crack serener or could it be the cam serener sorry about the spelling just do 12 hours on nights and 4 mile walk home HELP PLZ thanks shane
 
hi mr blackc55 the is no engine light on the dash and all lights go out when turing the key plz for give me for this what is a star and where can i get this done i am in west midds thank you shane
 
A Star is A mb diagnostic tool. It will help to find the cause of the fault.

A specialist (like me)and main dealers have them.
 
hi guys just a quick one just replaced cam and crack sensor and key now and the ml 320 year 2000 still will not start up turns over but will not start can any one help plz thanks shane
 
ml 320 on 2000 plate will not start from cold

hi guys just a quick one i have replaced the crack and the cam and the key but still the ml 320 , 2000 plate will not start it turns over but will not start up can any one help plz :wallbash: thanks shane
 
You need to get it plugged in or you will be swapping parts for no reason and just wasting money.
 
codes for ml

hi guys had the ml on a star and the lad has gave there codes to the wife why i was at work

code b1703

code c10000

gearbox code 097 , 116 , 129 , 136 ,

can some one help me plz
 
can some one help with this plz

i have a ml 320 on a 2000 plate had the ecu read and the guy gave my wife there codes they are

codes b1703

codes c1000

atuo gearbox

code 097

code 116

code 129

code 136

can any one tell me what it means or how do i fix them plz thanks shane
 
hi guys had the ml on a star and the lad has gave there codes to the wife why i was at work

code b1703 at ok thank you for all your help with this so guys

code b1703 intermittan no start amm immobilser modale how do i get a round this plz
 
Hi



code b1703 intermittent no start AMM immobilizer module


Replace the AMM unit it will need synchronizing on STAR
 
Last edited:

Users who are viewing this thread

Back
Top Bottom