OBD II socket

[Dieselman]

Does anyone have an OBD II socket and appropriate wiring available for a W210, preferably with as much wiring as possible to the 38 pin DTC connector.?

 

[230K]

Hi Dieselman

Are you thinking of buying a ScanGuage II? I have a 38 pin to OBD II lead but i am waiting until i get the ScanGuage to see if it works before buying an extension OBD male to female lead.

I got my 38pin to OBD from http://cgi.ebay.co.uk/ws/eBayISAPI....m=120206982771&ssPageName=STRK:MEWN:IT&ih=002
extension cable can be got here http://www.obd2cables.com/products/

230k

 

[vijilants]

Does anyone have an OBD II socket and appropriate wiring available for a W210, preferably with as much wiring as possible to the 38 pin DTC connector.?

If you want the pin numbers and what they do I have that. If you PM me with your email address I may be able to send you a hard copy

 

[richard]

WHat are you trying to achieve

I have the part numbers (somewhere!) for the proper ODB-II mercedes socket and some pins

The US cars have an OBD-II socket, and a gateway module,(dependant on age) that makes the engine management communicate with OBD-II protocol - but the cars still have the 38pin connector for diagnosis of everything else

R

 

[Dieselman]

Hi Dieselman

Are you thinking of buying a ScanGuage II? I have a 38 pin to OBD II lead but i am waiting until i get the ScanGuage to see if it works before buying an extension OBD male to female lead.

I got my 38pin to OBD from http://cgi.ebay.co.uk/ws/eBayISAPI....m=120206982771&ssPageName=STRK:MEWN:IT&ih=002
extension cable can be got here http://www.obd2cables.com/products/

230k

Thinking about it.

You need to know which pins are connected on the 38 pin plug as some are set for OBD 1 not OBD 2.

If I do this I was thinking of doing a proper installation for the OBD socket.

 

[Dieselman]

WHat are you trying to achieve

I have the part numbers (somewhere!) for the proper ODB-II mercedes socket and some pins

The US cars have an OBD-II socket, and a gateway module,(dependant on age) that makes the engine management communicate with OBD-II protocol - but the cars still have the 38pin connector for diagnosis of everything else

R

The p/n would be good, a scrapper OBD socket would be even better..

I've been investigating and am not sure the gateway is required for two reasons.
People do seem to have been able to attach a line to pins 4 and 15 to obtain output, though I'm not sure which reader they are using, possibly carsoft.

The ECU appears to have a direct ISO-K line output on pin 50 but not sure where to obtain an L line from. (if necessary)

Can someone lookup the connections for the X11/22 OBD2 socket. for a US E300Turbo.?

 

[230K]

Hi

I opened up the 38 pin adapter i bought and she only connects to 1,3 and 4. 1 is ground, 3 is positive 12V and 4 seems to be fuel system. No mention of K line in desilva's diagram. I doubt mine will work straight out of the box.

We will get through this.

230K

 

[television]

I have it of sorts and I was looking before you asked

X11/22

4 )-br --------
5 )-br M606
5 )-br/gr M104
5 )-br/ws M119
5 )-br/gr M112- M 113
5 )- rt/ws -------
N )- ws/vi M606
N )- ws/swM104
N )- ws/sw M119
N )- ws/sw M112, 113
16 )-rt/ bl M606
16 )-rt/ws M104
16 )rt/bl M119
16 )rt/ws- M112,M113

I am still looking to see if there is something of more use

 

[230K]

Hi

Television i got your reply to the other post. Can you explain what the above post means?

Thanks,

230k

 

[television]

Hi

Television i got your reply to the other post. Can you explain what the above post means?

Thanks,

230k

Well I scanned the whole documents as Will asked for the wiring on the X22/11 ODB connector. I copied it out as above and it looks to me as the the pins are wired to receive info from all of the engines as

thats​

what the numbers are. I was hoping that Will would have posted back, the info was foe a USA diesel 1998 on,, as ODB are data lines its quite possible for all the signals to be on 1 lead

I do have other info as to were the X22

connector​

joins in the the main box

 

[Dieselman]

Any OBD 2 socket will do

I've just checked an A class A 168 tonight and that socket will be just fine, so does anyone have any sockets lying around.....???????