Radiator warning light HELP PLEASE

[mickeystitch]

Hi sorry to repost this but in case somebody can help but might not read the old thread I'm going ask here too, please see

http://www.mbclub.co.uk/forums/engi...163-coolant-light-but-coolant-level-ok-2.html

 

[elite_504]

Low coolant level or overheating?
If it's showing low level and the level is ok, chances are it's the washer level that is low.
Been covered on here a few times, but the two sensors are in series and only a small resistance difference between the two. Add a few years and some furry connectors, and it often gets it wrong. Top up the washers and verify the warning goes. Then make and break the connectors a few times to clean up the contacts, and prevent heart-stopping warnings in the future.

 

[mickeystitch]

thank you for taking the time to reply Elite_504 I really appreciate you pointing me in the right direction, both bottles levels are where they should be so will start breaking and making connections as suggested until I find the bad one, I did a search but only found that one thread so was all I had to go on, I think the MAF is my other problem but I will deal with that, I had been told it was done just before I brought it but clearly not or if it has then a duff/cheapo one was used. thanks again