Hi all
My rear window on my W208 CLK Cab has moved towards the drivers window from the bottom by about 2-3mm. Unfortunately this is preventing the seal in between the two windows to make the "bead" properly (I hope I am making sense here)
The rear window also does not seem to have a a smooth movement with a bit of a metalic as it goes down. The metal bar does look like it has been rubbing with metal as the black paint has come off.
Near side window seems fine.
I have been advised that the runner below the rear window needs adjusting.
Is this common or have you guys or ladies out there got some advice.
My rear window on my W208 CLK Cab has moved towards the drivers window from the bottom by about 2-3mm. Unfortunately this is preventing the seal in between the two windows to make the "bead" properly (I hope I am making sense here)
![Confused :confused: :confused:](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f615.png)
The rear window also does not seem to have a a smooth movement with a bit of a metalic as it goes down. The metal bar does look like it has been rubbing with metal as the black paint has come off.
Near side window seems fine.
I have been advised that the runner below the rear window needs adjusting.
Is this common or have you guys or ladies out there got some advice.
![Eek! :o :o](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f631.png)