TomsAmg
Active Member
- Joined
- Jul 30, 2014
- Messages
- 68
- Car
- 2000 CLK55 AMG
Hi guys,
Treating a tiny bit of rust on the rear arch before it becomes bad, will be sanding it down to bare metal and then treating with a rust converter,
Question is what rust converter, I want to be able to prime over the top with a zinc primer, for extra protection, but not sure how I would go,
Do I just apply the converter, then apply the primer , then sand etc,
So I need to know the best converter to use primer on, or do I forget primer and go to paint on top of the rust converter, ant imagine this being a good finish though??
Treating a tiny bit of rust on the rear arch before it becomes bad, will be sanding it down to bare metal and then treating with a rust converter,
Question is what rust converter, I want to be able to prime over the top with a zinc primer, for extra protection, but not sure how I would go,
Do I just apply the converter, then apply the primer , then sand etc,
So I need to know the best converter to use primer on, or do I forget primer and go to paint on top of the rust converter, ant imagine this being a good finish though??
