Sometimes, if I shift to neutral when waiting at traffic lights the box does not want to engage drive when it's time to set off.
I move the lever to 'D' but nothing happens, though it always engages eventually after a bit of shifting the lever back and forth after about 15 seconds or so...
Hi i need to get it change W203 (2005 Cdi) V Belt iam wondering do i have to get genuine v belt and what else do i have to change some says i have to change Pulley when i change the belt?
Thanks
As above, I only drive the clk once a week usually on a Monday or Friday into Glasgow. The car has performed perfectly since my acquisition in Nov.
So after driving into work and home again the car wouldn't allow me to move past neutral to get to park. It engages drive no problem but I can...
I've had a pretty shabby service experience with a dealer this week whilst the car was in for an service and before I totally lose my rag with them i wanted to double check something.
It's been sat with them for 2 clear days since the service was done waiting parts that still haven't come in...
Please don't try this at home :D
Mercedes 560 SEL
Even though the car is almost 30 years old but it pulls like a train
Anyone here with a crazy experiences????!!!!!!
As the title suggests I need the torque figures for the drive belt tensioner and idler pulleys on my E220 CDI W211. I am replacing them along with the drive belt but the Haynes manual does not include either the procedure or torque loadings for the tensioner or idlers.
There is a lot of noise about removing white lines. All of the current systems for 'self drive' cars (including Merc's Distronic Plus & Tesla's Autopilot) totally rely on white lines. So just as the world is moving in that direction, the UK councils & government think it a good idea to remove them !
hi there can anybody help I recently purchased a 300ce 1990 w124 and am currently doing some work to her. I am after the rotor arm drive sleeve which is attached to the end of the camshaft. the rotor arm is screwed to it using three screws. the part broke while I was trying to remove it...
Is it possible to rig a W163 to run front wheel drive only as an emergency measure?
I have a ML270 with a damaged rear diff, so I was wondering whether it would be possible to drop the rear prop shaft off, and then drive it with only the front prop connected? Not for ever but just for...
Good morning – I’m changing the diff in my W124 superturbodioesel from 3.27 to 2.87 and while I’m at it I’ll be replacing the driveshafts and inspecting the bearings in the rear hubs.
Has anyone got any hint and tips?
Cheers,
Max
Cut a long story short my car has an external gearbox oil cooler bypass from before i bought it so it doesnt use original gearbox cooler mounted under radiator.
One of the pipes burst the other day allowing all the gearbox oil to leak, the car lost power and wouldnt move.
I have changed the...
Hi can any one help please Mercedes c220 diesel 57 plate Thick black smoke in reverse think black smoke when I stop in drive at a traffic light any time I'm stopped its smoking bad but it dont smoke at all when in park Rev it no smoke - no smoke when I'm going along just when stopes in gear any...
Got a quick question, can I drive a car under yellow slip temporary for around 10 days if the slip is not registered under my name, a mates name who if I get pulled over can confirm its him etc.
I am building a project 300se with a 5 speed auto box but I need to retrofit the electronic speedo. Now what I am wondering is the trigger wheel in the gearbox, how many teeth are on it.
Hi new to Mbclub, I've joined as looking to buy an e55 pre 2000 and having current issues with my C class coupe w204 61reg
Im having a few issues and if anyone has any suggestions /advice I would be very great full.
1) on acceleration (not every time) sometimes the car lags and keeps the...
The DVD drive/nav unit in the rear of my 211 has been playing up for a while now, despite me having stripped it down to clean the lens etc. A new one is out of the question on cost, but I have found a used one at a breakers for a reasonable sum. The only slight problem is that the one on offer...
Hi all
Looking for both rear drive shafts (complete units) plus the rear hubs/wheel bearings (left & right) for a 1998 W210 E55
Must be in good usable condition, so anybody breaking an E55
Thanks
Mark
Hi, I've owned my '94 e220 coupe for a few months now and it's going great. However, recently, when I have put the car into reverse, what I can only describe as the car stalling. Any reason why this would happen? Many thanks.