egr

Hi all, my Merc e320cdi w211 is now in limp mode! I noticed a few months ago that if I accelerated hard then the car would go into limp mode! This wouldn't always happen but may 3-4 times out of 10! If I turned the engine off then it would all resume back to normal with no issues.Anyway this has...

i have a 2003 clk 270cdi,i recently removed the egr to clean it,when i refitted the egr the management light came on,i have purchase a carsoft i980 and deleted the management light but it comes back on a few miutes later and the code reader states egr valve fault,i am now doing the egr delete...

i have a 2003 clk270cdi and i removed the egr valve to clean it,since refitting the management light has come on,i purchased a carsoft i980 to delete the light but it comes back on 2 minutes later,the i980 states egr valve central too low,what could i have done to make the light come on

Guys, My w211 2003 e270 cdi, that put out too much of black smoke. Can i bypass the EGR?? How do I close the EGR? Can I juz unplug the cable from the EGR? Or another better method? Thanks.

after removing,cleaning and refitting my egr valve on my 2003 clk270cdi the management came on,i have purchased an isoft i980 and deleted the fault code,however it came back on 24 hours later,the fault code is P1403-032 which then states EGR VALVE POSITIVE CENTRAL VARIATION TOO LOW,can...

Hi all I have a cls350 cgi which has just come up with the engine management light. Took it in to my local specialist today and the fault coming up is the right hand egr valve is jammed open. Apparently these cars have 2 valves a left and a right and you can only buy them in a set of 2...

I've had turbo and EGR valve replaced (garage said that valve was sticking) but it's gone into limp mode again. Doing my head in. Any ideas ? Car is CLC 200 CDI.

I've got a bit of spare time coming up and looking to expand the egr shunt mod so its off until engine is warm. I'm not in the UK these days and where I am in winter can be -20 for a good month so getting warm up times back to pre shunt would be ideal. I've searched long and hard but can't...

Hi all, I want to blank the EGR valves on my GL420. Does anyone come recommended in Essex/London? Thanks, Arif

i am still having problems with my c 220 cdi,if i disconnect the plug from the egr it stops the missfire and runs better,the problem is the em light comes on. my question is if i remove the arm that operates the valve that opens/closes and blank the egr off with a plate.so the egr thinks it is...

Probably a stupid question, but what does an EGR delete do? If I get a remap, is it something that can be done at the same time? Is it just a software change? Any downsides? Sent from my iPhone using Tapatalk

I'm going to be getting a remap on my S211 2007e280 in March and I was wondering if anyone on here had had the egr delete, from what I have read it can be done when the remap is done and I don't have to fit a blanking plate. What benefits have people on here seen from having this done? Mpg...

Happy New Year to all. Got a fault code P0404 and had a look at EGR today on MB C220cdi 54 plate. Removed black plastic cover on EGR.With engine started and ticking over the valve opens, i.e. the spindle pushes down and slightly fluctuates up and down. My understanding is the vale should be...

Hi, looking for a working EGR valve for a 2004 MB C220cdi W203. If anyone has one for sale please contact, thank you.

Hello everybody, wonder if anyone can help. C220cdi manual estate 2004 - keeps going into limp mode with no lights coming up on dash. Plugged in OBD and P0404 & P0401 keeps coming up after clearing. Located the EGR and lubricated the spindle under black plastic cover which was sooted up but...

Hi all, I have read a few threads on this subject but struggle in finding out what resistors etc are needed to create a circuit that would work on my c220 Cdi 54 plate which has the dpf filter. If any one has successfully managed this task can you please let me know. I have spent a lot recently...

my EGR valve is shot and looking at getting 1 from euro CP as merc is a 6 day waiting from Germany can anyone tell me if it needs to be programmed or is it a straight swap thanks

Im new here. Nice forum! I got a question about my 2002 S210 320cdi OM613 As the title says, I want to remove/deactivate my EGR valve. But I can't find parts or any "emulator" to do this, like you find everywhere for the bmw's. Have anyone done this? Any help would be fine. Thanks :)

I've got an 07 CLK320CDI that's displaying PO404 and it won't go away! I've changed the EGR, even though the old one didn't look problematic. It also has a 'jerk' at around 2k. I have to unplug the EGR to stop it from going into limp mode which leaves me with the light on and a...

Hi all, just done the swirl flap and EGR deletes, loads of fuel getting to the injectors but won't fire, any suggestions on what to try? Many thanks