egr

Used but in perfect working order All v6 diesels apart of viano 125 p&p Part number A642140

I'm having trouble finding a source for the egr valve that fits onto the front exhaust manifold, I'm also after the pipe that fits into it. Can anyone suggest where I may get one from? Thanks

I'm having problems trying to get hold of an EGR sensor for my 05 CLK 320 CDI, I've ordered the part through EuroCarParts and they sent me the wrong one and I nearly ****ed the threads trying to fit it. Anyone know where I can get hold of one? Part No. A0061531128

Hi Guys, I've just been through the whole choked inlet manifold saga with my ML270. At the EGR was putting into limp mode with a 3000 rev cap. I've removed the swirl flaps and cleaned the EGR. Since putting it all back together it ran fine for a couple of weeks. I put the remaining pipe...

Hello All, I have a 2006 W211 E280 CDi with 125k miles. There are no warning lights or fault codes. Virtually all the time I have owned the car, 2 1/2 years, 50k miles, it has had a sticky EGR valve. Has anyone successfully removed and cleaned one or will it need replacing. I wish I...

Hi All. Looking for part number 00005320C5. Does anyone have one or suggest the best place to buy, other than Main Stealers? Thanks. :thumb: PS are these a common part to all diesels or they specific to the Class and engine size?

As above i am assuming the egr is electronically controlled and therefore would have to be fooled to prevent limp home mode

Hi, I'm new to MB club but have had my C220 2002 for about 7 years and done over 60,000 miles in it. It has 186,000 on the clock. I have just had my alternator reconditioned and while it was off (watercooled, what a job!) I tried to turn the turbo vanes and they were very stiff and lumpy. I...

I want to remove all of these horrible systems that Mercedes have fitted to me car, EGR valve, Inlet port flaps etc, after cleaning my EGR valve last month it actually upsets me to see how much crap is going through my engine. Have I read correctly that the software for these systems can't be...

thought first step in solving the not revving over 3000 problem would be to remove and clean the egr valve am pretty confident but are there any pictures / video anywhere? thanks

Evening,i have noticed that for the first few minuets of driving my e320 cdi the performance is quite brisk then changes to embarrassing,on lifting the bonnet and turning the engine on and off the swirl flap motor works for a period and then stops..is this down to the egr?what can i do to sort...

Hi all - I have scoured Google and the forums for 3 days now but don't seem to actually be able to find someone that has done and egr blank on a C220cdi and then mapped out the errors - is it simply not possible? Seen a few posts that talk about some fancy electronic dummy egr and resistance...

Hi everyone, Have got a split rubber boot on a line coming off the secondary air injection on my 1999 SL600. Am trying to find the part number to replace the boot (or the line if I have to)....cant seem to find it on EPC...help!? Piccy here: Thanks!

Hi, Hoping to get some help and advice. I am experiencing the common problem of losing kickdown on my Merc E270. 3 months ago the car suddenly lost kickdown and restarting it fixed it. Since then, I had the issue 4-5 times. But since the last 5 days car regularly loses power after 5 minutes...

Do we need to activate new egr once fitted via Star? Thanx

Hi, Ive been having nightmare with my Sprinter van over the last six months. Excessive billows of white smoke (especially at idle and on acceleration) and fumes in cab. Problem comes and goes as it pleases All injectors replaced at the Mercedes garage - problem persisted DPF removed and...

Hi all, Just about to take the egr, cooler and manifold off my 2002 E320 cdi with 146k. Ive got a spare manifold from a breakers which im cleaning up now so I get swap over quickly. Question is - I see the manifold has a coolant port and coolant pipes. None of the threads ive looked at have...

I have removed and cleaned the manifold on my w210 e220 . And I tried sucking on the valve to check if it moved and it didn't .I thought perhaps my sucking was not strong enough but when I tried the suction on the pipe It felt very weak. Any ideas:crazy:

DPFE (differential pressure feedback EGR) sensor is it prone to die? my W203 C220 CDI is starting to act up entering limp mode due to a P0401 code... valve working correctly but DTC cores keeps coming back to pending codes... is the DPFE sensor expensive? where is it located? is it a...

I have two Mercedes vehicles which are down on performance and have mpg's 25-45% lower than when I first purchased them and I believe the issue is down to the DPF factory fitted to both. The C220 '09 Blueefficiency has been to Mercedes for a forced ReGen of the DPF after an engine management...