injector

Hi all i am new to this forum but after a lot of google searching this is the place to be for mb help. I have purchased a c220 2002 for my dad. at first drive the car felt great however when the heater was turned on there was a diesel smell coming from the cabin. i opened up the engine cover...

Any 1 breaking a vito may need a injector w638 2.2 cdi

Hi its time i did a job on my injectors and seals .How do you clean your injectors Bosch CSI type @ £18 each for cleaning = £124 this i think is robbery .I am sure i can find a way to clean them out .As i have been looking at a sonic cleaner to do the job. So can someone say how they did...

Hi New on here, I have 1971 350sl. I am having intermittent problem where engine performance drops and sounds like running on less cylinders, does this for a while then picks up. I have changed plugs, leads etc but it has been suggested that the injectors might need a refurb and are getting...

Hey! I'm new to the forum and have been following advice on other post but I'm still struggling massively. I brought an ML270 last month, with the an injector bolt snapped, and the injector half ejected from the head. So I drilled out the bolt as far as I could, tapped a new thread etc etc...

Hi. I need to change 2 injector. My car is fitted with bosch 0445110055 and I found at a store bosch 0986435133. They say its ok to run with 3 bosch 0445110055 and 2 bosch 0986435133. Tommorw I must order that 2 injector. Please advice. Its compatible to replace bosch 0445110055 with bosch...

AS my title suggests it is now day five trying to remove the injectors in my vito. i have tried wd 40, lusol, coca cola and a heat gun along with several chisels, a newly purchased slide bar kit, and a 4 foot long pry bar, and all i have succeeded in doing is breaking the injector that is left...

My D jet injectors from the W114 coupe (of which I now have 12) are a good 43 years old and could do with an overhaul. Does anyone have a recommended specialist to do this reasonably? Even if I don't end up fitting them, they do have some resale value and I'd rather sell them as running and...

Hi all, once again the first injector is blowing through the seal, in the past 2 years this will be the 3rd time of having to get it fixed, is this normal? I have read somewhere that I can use a different copper seal than the merc one that is slightly thicker, think it was a honda washer, is...

Hi all can anyone help ? I have a knackered no2 injector and have never removed one before. I have noticed that watching videos on you tube that you unscrew the electrical top part then lift out the part underneath with the spinner to access where you would screw in an extractor. But the spinner...

Not fail, but poor performance? 200,000 miles on mine atm , one injector is reporting 'high back pressure' or something like that. I can get recon ones for 75 quid on the continent which is less than reconning mine.... so, replace or waste of money? 32mpg on the pooter on rural roads. Feels...

Hi all hope your all ok and hope your MB are all behaving for you. Just an update as last Sunday I had a no 2 injector seal give up on my ML270 it's got a 3 month warranty so at 715 this morning I made a 57 mile one way trip to Llanwrtyd wells just past Builth wells to get it done and fair play...

Recently I decided to change my 2 faulty glow plugs, first one got loose then just spun, so have left it as is for now. Doesn't seem broken but I found a bigger issue, injector leak! 5 out of 6 wells had diesel in them so i got the engine hot and managed to get 5 out, one is stuck and I will...

Hi, the engine wasn´t starting smoothly and a little smoke from the engine cover so went into the local Merc independant here in Valencia. They said it was the injector seat and that an injector would need replaced , the others cleaned. I may have driven it 500km from noticing this fault but...

Guys, which diesel injector cleaner would you recommend for a 2011 E350 CDi? Is Millers any good?

Hi I think I have a faulty Injector, on starting cold engine it runs as if one cylinder is not firing at all but if i hold the revs at 1500rpm until some heat gets into the engine the misfiring stops and the engine runs ok. I had originally thought it was air in the fuel system so I renewed all...

One of my injectors is blocked, and the fuel economy is poorer than it should be. Mileage 192,000 miles FSH. Injector cleaner has made little to no difference. Its cheaper to buy recon injectors than have mine re-conned:doh: Work that out. Last time I had the top off, it all looked...

hi one of my injectors has failed E320 cdi 2003 there are parts Nos on but not all same ie o445110 202 0445110 35 which is right they all seem to be different any help much appreciated

Hi Happy New Year To All Following on from my last post UPS man came to day with a New Injector Say new its a recon with 12mth that will be Fitted Tomorrow on my CLK 270 CDI Year 2003 Dose anyone know if this has to be coded to the car The injector is 0445110121 Code (2) & or A6130700687 As...

Hello fellow members&a happy xmas to you all. I have a 55 plate clk 270 cdi & i heard a ticking / hissing noise coming from the top of the engine so i poured soapy water along where the injectors are & the 2nd injector from the front of the car was blowing. Will these be the injector seal ...