injector

I have read the blink codes on my 1990 300TE 24v in order to trace a poor running fault. The reader shows 'Injector, Cylinder 4'. Any ideas what this is likely to be? I don't know how the fault is detected so could it be with the fuel distributor or perhaps a leak on the injector itself? Do the...

Hi All. I have a 59 plate C220 Estate BlueEff. I took it in to the local MB specialist to have service and MOT. I was told that injector 1 was leaking, it required new bolt, washer and reseating. I paid for this. Since happening when the car is cold its misfiring and is very lumpy under...

Hi guys, was hoping to pick your brains regarding a matter. I have just bought a E220CDI a couple of weeks ago and took it in for a service at a garage my friend works in (they do basic services and are mainly involved in tyres etc). Anyway during the service I was sent a picture of...

hi i have posted about this before i have put my car in to aa merctech in hoddesdon for a diagnostic report they have had it a week and still cant get it to run there is a fault with the injector pump because it does not click over surely a full diagnostics would point out the problem because i...

Hello, My first post on here, I have been lurching for a while and have really enjoyed the wealth of information Cheers ! Firstly i bought my first MERC ML 270 CDI - 2002 6 Months ago. It discovered (or i noticed) it was ticking. This turned out to be a incorrectly seated injector. I managed...

Mercedes C220 CDI W203 Auto Car is shaking on idle but once over 10 mph car runs very smooth. It also picks up speed a little late. Took the car to the mechanic, who told me changing all 4 injectors will solve the problem. Got all 4 reconditioned for 500 pounds, got them fitted problem is still...

Mercedes C220 CDI W203 2002 611 engine My car was shaking on idle and a little black smoke from exhaust when revving. After taking the car to a mechanic , i have been told that all four injectors needed to be replaced. Bought four injectors and gave them to the mechanic. When i had been told...

Hi, I'm looking for a new injector and have posted in the classified section I have a 220 cdi w203 2002 and my injector part number is A6130700687 for all 4. Someone said that it for a 270 cdi My question is, I have seen some A6130700987 injectors for better price Would this fit in...

Hi everyone, I am in need of a injector for Mercedes c class w203 220cdi 2002 Part number is A6130700687 I was told I should get a brand new one or reconditioned, if anyone knows a decent source or has any, please do let me know. Thanks

hi can anyone help ive snapped the injector bolt in the hole trying to tighten it because my injector was blowing now i dont no what to do

Does this sound like an injector knock? I know I need the glow plugs replacing but this strange rattle/tick sound is concerning me? It's always there but does go away after a certain speed I think around 40. And when I accelerate from idle it gets quicker, then stope after about 1200 revs and...

Searching through the forums it seems this is a reasonably common issue. I have an 04 C270CDI and yesterday I noted a distinct smell of exhaust fumes coming in to the car. I also felt that the car had lost some of its performance so on arriving home I popped the bonnet and found oil on top of...

I put my c220 Sport 46k 60 plate in for an A service last thursday, and they advised the wife, when she collected the car that no 4 injector seal had a minor leak, nothing to worry about? I took a look myself the next day and sure enough the rear most injector has a bit of oily residue around...

Hi, I am thinking of buy some new injectors from eBay, I have searched for my part number and it brings up many variations, can someone confirm which I need? I have a 02 model w203 c220 cdi Also is it right that you need to turn the car over for quit some time once an Injector has Been...

Hi Everyone I have just finished replacing all of the injector seals and bolts on my ML270 to solve the "black death", and I noticed a crack in one of the injectors, about an inch from the bottom. This was injector number 4, and was the cause of the black death. It needed a slide hammer to...

Hi all The problem I've got is this: I'm currently in the process of removing all 5 injectors and replacing seals and bolts to solve a blowing injector / black death problem. I have done four with no major problems, but injector number 4 is stubborn. I just can't get it out, but is...

Hello all. I thought it was about time someone did a write up on how to remove a stuck injector, re-cut the head face and re-seal. The car I am doing this on is an ML270CDI. Most of the rules apply to all CDI injectors. Make sure the engine is HOT. It will help. Firstly remove the engine...

Hello all. I thought it was about time someone did a write up on how to remove a stuck injector, re-cut the head face and re-seal. The car I am doing this on is an ML270CDI. Most of the rules apply to all CDI injectors. Make sure the engine is HOT. It will help. Firstly remove the engine...

My 2008 W204 C200 CDi has just turned 80k miles. I was thinking of using an injector cleaner to give the fuel system a bit of a spring clean. The car drives pretty well but I thought it may be a good maintenance decision. I have not used it in this car however I don't know if the previous owner...

Hi, my 2008 c220cdi has had problems with injector no2 copper washer leaking, and last week the hold down bolt ripped out of head, ive had it sent to local merc specialist who re-tapped the thread and fitted an m10 shorter bolt, new washer/hold down clamp and feeder pipe. all seemed ok but when...