intake

Theres a chance someone might have one :D

As above, what is the schrader underneath the left intake (when looking into the engine bay) on my C32, when I take the clipon cover off? A/C in on the RHS, and under the cover on the left of the condensor. I know where the gearbox is, so what is that externally threaded schraeder?

Hi, I'm Looking for a dual air intake housiing in reasonable condition, cheers

So...I got my BMC air filter today, I was about to go install it when I look in my engine bay and realized this: The cold air inlet, the hose which connects the air box to the inlet is missing and it turns out the box is broken at the end...It turns out the guys that fixed my car after it...

My 06 E320 CDI with 55,000 miles limped home yesterday with little accelleration and the engine management light was on the dash. The garage have advised me that the intake port shut off motor had gone. This is the second time this has happened to me and at £600 a go to repair is becoming...

Long story short I had mine shotblasted and it expanded by 10mm so I need a replacement, any will do as long as its from a saloon.

I had my E200 k hooked up to my friends snap-on dignostics last week and I noticed that the air intake temp was reading over 60 degrees celseus . I reckon this is very high as the car was not runnig very long and the outside temp was less than 10 degrees . Would this be pointing to some problem...

Im about to remove my intake manifold on my W210 320CDI as 3 days ago when I floored it on motorway in front BMW I triggered his automatic driving light with my black smoke.:D:( It looked like he was coming out from flaming spot on a road. I felt like s..t :o:doh: I found that small bar on...

Hi - I wonder has anyone replaced their air intake hose? I have cleaned up my engine bay but the air intake hose spoils the look. I.e, it looks a bit tatty. Are there any aftermarket silcone type hoses that i could use to replace? It it the ribbed hose at the bottom of the stock photo above...

i fitted new cats to my w202 MB ones i tought i had a blow under or near drivers side pedals i said i would look at the engine bay so i striped out all plastic parts air box maf intake pipe and so on i saw a little oil near rocker so i nipped the bolts a little i looked at the metal...

Help -Alternator Mysteries W211 2007 320Cdi Est The van my son had hired brokedown and we sat in my car with the engine running and heater & TV on for about 4 hrs waiting for the AA to come and recover the van. Stupid I know, but it was cold and boring! On the trip home the red battery appeared...

does anyone know where it goes? i thought it might be near the MAF? oh it a E430 W210

Hi, 1st post here so please be gentle with me please... :o I´ve bought a brand new C270 intake manifold because of i have oil dripping from inlet ports. Does anyone have tried to do such a job here? , what do i have to remove to do such a job? Thanks, and sorry for my english

Wanted, M113.960 (5.0) intake manifold, manifold required for ongoing project so not in a particular hurry. PM me if you have one available. Cheers

For the past 5 months my E280 (W124) has not missed a beat, no fault codes. Perfect, except for one thing, it doesn’t have typical mid ranch punch that it should i.e. the surge at 3500 rpm. This car seems to pick up at about 4500 rpm, a 1000rpm later than it should. Personally, I’m convinced...

I want to change the air intake hoses in the engine bay. The original ones are made of a degradable material and as such are wasting away. The ones used on the R129 SL however were plastic, and also the 5.0 M119 engine was used in the 500. Will the 129 hoses fit on my car? 124 Part No. -...

Can anyone point me in the right direction please? I need to know the location of the drain in the heater air intake box as i suspect that water is building up there as the windows are steaming up when the car is left and I can find no sign of dampness anywhere inside the car ::confused: Cheers

my ml went into limp mode the other day so i took it to a garage and they put it on a diagnose machine and it came up with a fault on the air inlet valve can anyone help me by telling me waer it is and how easy it is to fix or replace please :wallbash:

I start to think in my engine where is no MAF sensor, and amount of air is measured by measuring temp of incoming air. I think at low rpm engine is sucking air by himself, and air movement in the intake is slow. As turbo is start to boost air moves faster and it cools the iat sensor. I wonder if...

Hi All, Got this fault code P0110 on the merc a140, there is no voltage apparently going to the ADC (Air duct?) either. Any ideas where this sensor is and how it can be sorted????